The Smoant Battlestar Nano RDA 80W Starter Kit presents a compact, travel-friendly set-up with the efficient Battlestar Nano 80W Box Mod to pair with the 24mm Battlestar RDA. Engineered with reduction in size and ergonomic structure from the iconic Battlestar 200W, the Battlestar Nano implements a screenless design for battery efficiency. Powered by a single 18650 battery (sold separately), it can fired up to 80W of maximum power for midwattage usage. Pairing with the device is the Battlestar 24mm RDA, featuring a horizontal two-post, four terminals build deck design and dynamic side airflow control.
Smoant Battlestar Nano 80W Box Mod Features:
- Dimensions - 81mm by 37mm by 24mm
- Single 18650 High-Amp Battery - Not Included
- Wattage Output Range: 1-80W
- Max Output Voltage: 4.2V
- Max Output Current: 40A
- Minimum Atomizer Resistance: 0.05ohm
- Superior Zinc Alloy Construction
- Screenless Design - Energy Efficient
- Oversized Firing Button
- Low Resistance Protection
- Over-time Protection
- Reverse Polarity Protection
- Overheating Protection
- MicroUSB Port
- Spring-Loaded Stainless Steel 510 Connection
Smoant Battlestar RDA Features:
- 24mm Base Diameter
- Deep Juice Well
- Superior Stainless Steel Construction
- Gold-Plated Build Deck
- Horizontal Two-Post, Quad Terminals Design
- Top-Secured via Slotted Screws
- PEEK Insulator
- Single or Dual Coil Configurations
- Dynamic Side Airflow Control
- Delrin Widebore Drip Tip
- 510 Connection
- 1 Battlestar Nano 80W Box Mod
- 1 Battlestar RDA
- 1 Screwdriver
- Spare Parts & O-Rings
- Instructional Manual
Please have a great understanding and technical knowledge on how to use this product in order to properly use it.
In order to use temperature control feature, it requires use of nickel, titanium, or stainless steel coils.
Note: There is always an inherent risk when using any rechargeable batteries at anytime and under any circumstances. ElementVape.com and any of ElementVape.com’s parent and subsidiary companies are not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making.
ElementVape.com and any or all of ElementVape.com’s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly.
When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries at the clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in controlled environment
Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Please dispose battery cells, chargers or any other electronic devices in accordance of local laws and mandates.