The Sigelei VCIGO K3 150W TC Box Mod presents a light-weight, high-performance vape device integrating an intelligent chipset capable of 150W of maximum power along with a suite of sophisticated temperature output. Built with the optimal balance between performance, size, and form factor, the Sigelei VCIGO implements a soft curvature contour with simplistic lines. Powered by dual 18650 batteries (sold separately) accessed via magnetized battery door, the VCIGO K3 features a maximum output of 150W and several advanced output modes. Under temperature control setting, it has Temperature Coefficient of Resistance (TCR) setting, a proprietary technology to adjust resistance of a wide range of heating elements to different ranges with three separate memory mode.
Sigelei VCIGO K3 150W TC Box Mod Features:
- Dual High-Amp 18650 Battery - Not Included
- Wattage Output Range: 10-250W
- Voltage Output Range: 1-7.5V
- Minimum Atomizer Resistance: 0.1ohm
- Temperature Range: 200-600F
- Versatile Temperature Control Module
- Supports Ni200 Nickel, Titanium, and Stainless Steel Heating Elements
- TCR Adjustments
- Lightweight Plastic Frame Construction
- Intuitive 0.91" OLED Display
- Three Button Operations
- Magnetized Battery Door Cover
- Reverse Polarity Protection
- Low Resistance Protection
- Low Battery Protection
- Overheat Protection
- MicroUSB Port
- 510 Connection
- Available in Black, Blue, Red, Green
- 1 VCIGO V3 150W Mod
- 1 MicroUSB Cable
- Instructional Manual
Please have a great understanding and technical knowledge on how to use this product in order to properly use it.
In order to use temperature control feature, it requires use of nickel, titanium, or stainless steel coils.
Note: There is always an inherent risk when using any rechargeable batteries at anytime and under any circumstances. ElementVape.com and any of ElementVape.com’s parent and subsidiary companies are not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making.
ElementVape.com and any or all of ElementVape.com’s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly.
When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries at the clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in controlled environment
Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Please dispose battery cells, chargers or any other electronic devices in accordance of local laws and mandates.