The Sigelei Sibra E2 80W TC Starter Kit is a dynamic one-handed vape set-up, featuring a visually striking and ergonomic design, 0.91" OLED Display Screen, and access to a full temperature control suite to pair with the Sobra Mini Sub-Ohm Tank. The Sigelei Sibra E2 80W Box Mod is formed to fit within the natural contours of the palm while implementing textured grips and grooves to maintain a solid hold on the device. The Sibra E2 implements an intuitive 0.91" OLED Display screen that relays crucial output and status information to the user. Above the screen sits the firing button while two adjustment screens are located beneath the screen. Powered by a single high-amp 18650 battery (sold separately), the Sibra E2 is capable of 80W output and can access a comprehensive temperature control suite to find the settings for the perfect vaping experience. The Sigelei Sibra E2 is paired with the Sigelei Sobra Mini Tank, featuring a top cap quarter-turn side-fill system for the 5.5mL eLiquid reservoir, dual bottom adjustable airflow control ring, and access to the WF Mini Coil Family or the Sigelei MS Replacement Coils.
Sigelei MS Replacement Coils
Sigelei Sibra E2 80W Box ModFeatures:
- Dimensions - 85.5mm by 35.5mm by 25.5mm
- Single High-Amp 18650 Battery - Not Included
- Wattage Output Range: 1-80W
- Voltage Output Range: 1.0-7.5V
- Resistance Range: 0.05-3.0ohm
- Temperature Range: 100-300°C / 212-572°F
- Ni200, Titanium, and 304/316/317 Stainless Steel Compatibility
- TCR Adjustment Mode
- Power Mode
- Superior Zinc Alloy and Plastic Construction
- Ergonomic Design
- Stylish Snakeskin Design
- Intuitive 0.91" OLED Display Screen
- Two Adjustment Buttons
- Magnetic Battery Access Door
- High Input Voltage Protection
- Low Input Voltage Protection
- Reverse Battery Protection
- Low Resistance Protection
- Short Circuit Protection
- Overheating Protection
- Battery Imbalance
- MicroUSB Port - 2A Max Charge & Firmware Upgrade
- Spring-Loaded Gold-Plated 510 Connection
- Available in Serpentine Red, Python Gray, Serpentine Yellow, Kingsnake White, Serpentine Blue
Sigelei Sobra Mini Sub-Ohm Tank Features:
- 24mm Diameter
- 5.5mL Maximum Capacity - Bubble Glass
- Superior 304 Stainless Steel
- Pyrex Glass Reinforcement
- Adjustable Dual Bottom Airflow Control Ring
- Top Cap Quarter Turn Side-Fill System
- Sigelei WF Coil Family
- 0.28ohm WF Mini Coil - rated for 30-60W
- 0.25ohm WF-H Mini Coil - rated for 40-80W
- 510 Drip Tip
- Gold-Plated 510 Connection
- Detachable Structure
- 1 Sibra E2 Mod
- 1 Sobra Mini Tank
- 1 0.28ohm WF Mini Coil
- 1 0.25ohm WF-H Mini Coil
- 1 USB Cable
- 1 Glass Tube
- 2 User Manual
- 1 Warranty Card
- 1 Pack of Spare Parts
Please have a great understanding and technical knowledge on how to use this product in order to properly use it.
We highly recommend using an external battery charger for 18650 battery mods, as it helps with balanced charging and prolongs the life of the battery and mod, such as from worn out microUSB port. Never use damaged or improperly wrapped batteries with this device. We recommend all 18650/20700/21700 battery mods to use matching batteries with similar brand, model, and battery state at all times.
In order to use temperature control feature, it requires use of nickel, titanium, or stainless steel coils.
Note: There is always an inherent risk when using any rechargeable batteries at any time and under any circumstances. ElementVape.com and any of ElementVape.com’s parent and subsidiary companies are not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making.
ElementVape.com and any or all of ElementVape.com’s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly.
When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries at the clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in a controlled environment
Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Please dispose of battery cells, chargers or any other electronic devices in accordance with local laws and mandates.