The Sigelei E1 80W TC Box Mod presents a compact single 18650 platform within an ergonomic shell construction and a chipset capable of firing up to 80W with full temperature control.
Sigelei E1 80W TC Box Mod Features:
- Dimensions - 85.5mm by 35.5mm by 25.5mm
- Single High-Amp 18650 Battery - Battery Not Included
- Wattage Ouput Range: 10-80W
- Voltage Output Range: 1-7.5V
- Min Atomizer Resistance: 0.05ohm
- Temperature Control Range: 212-572F
- Ni200, Titanium, and 304/316/317 Stainless Steel Compatibility
- Intuitive 0.91 Inch OLED Display
- Durable Zinc Alloy & Plastic Construction
- Oversized Firing Button
- Two Adjustment Buttons
- Magnetized Battery Door Design
- Reverse Battery Protection
- Battery Imbalance Prtection
- Low Input Voltage Warning
- Short Circuit Protection
- Overheat Protection
- MicroUSB Port - 2A Maximum Charge Rate
- 510 Connection
- 1 Sigelei E1 Box Mod
- 1 MicroUSB Cable
- Instructional Manual
Please have a great understanding and technical knowledge on how to use this product in order to properly use it.
In order to use temperature control feature, it requires use of nickel, titanium, or stainless steel coils.
Note: There is always an inherent risk when using any rechargeable batteries at anytime and under any circumstances. ElementVape.com and any of ElementVape.com’s parent and subsidiary companies are not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making.
ElementVape.com and any or all of ElementVape.com’s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly.
When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries at the clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in controlled environment
Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Please dispose battery cells, chargers or any other electronic devices in accordance of local laws and mandates.