The Serpent SMM 24mm RTA is meticulously engineered with intuitive design elements from Suck My Mod, greatly expanding the performance range of the acclaimed series with a unique build deck catering to forward and reverse coil building coupled with 4mL maximum juice capacity and dual bottom airflow. The Serpent SMM RTA features Suck My Mod's creative configurations, implementing a unique two-post, dual terminal slots per post that caters towards single-coil build. The utilization of four slotted terminals measures 2mm by 1mm, allowing for forward and reverse coil construction, top-secured via Phillips screws for effective securement. Airflow enters the structure through dual exterior airslots, with the air channels redirecting up through two internal stacked slots per side measuring 3mm by 1.5mm each for a flavor-enhanced experience. The juice reservoir has a max capacity of 4 milliliters, refilled via a convenient threaded top-fill method to expose the two large filling ports. Completing the entire apparatus is a tapered 12mm ULTEM Widebore Tip, allowing for auxiliary cooling properties when used at high-power configurations. A truly sensational collaboration between Wotofo and Suck My Mod to produce a phenomenal rebuildable tank, the Serpent SMM 24mm RTA stands atop of its segment.
Serpent SMM 24mm RTA by Wotofo Features:
- 24mm Diameter
- 4mL Juice Capacity
- Superior 304 Stainless Steel Construction
- Pyrex Glass Reinforcement
- Unique Two-Post Build Deck
- Dual Terminal Slots Per Post - Caters to Forward & Reverse Coil Mount
- Single Coil Configuration
- Dual 4mm Wicking Ports
- Dual Exterior Airslots - 11mm by 2mm
- Two Internal Stacked Airslots Per Side - 3mm by 1.5mm Each
- Convenient Threaded Top-Fill Method
- 12mm Tapered ULTEM Widebore Tip
- 510 Drip Tip Adapter
- Gold-Plated 510 Connection
- 1 Serpent SMM RTA
- 2 Replacement Glass Tubes
- 1 Screwdriver
- 1 Pack of Organic Cotton
- 1 Pack of Prebuilt Coils
- Spare Parts & O-Rings
This product is for advanced users only. It consists of risk of damaging your mods, devices, and batteries if it is being used improperly. Please make sure that you have great understanding and have done researches on this product before purchasing.
Note: When it comes to using RDA, RTA, and RDTA, we strongly recommended to wash and clean all the atomizers thoroughly and carefully. Likewise, please have a great sense of knowledge when it comes to handling and using these products.
We always strongly recommend testing the coils with ohm-meter before using them with your mods, devices and batteries. Coils with low resistance are not suitable with all mods, devices and batteries. Please make sure that your mods, devices and batteries can handle low resistance before using them.
Note: There is always an inherent risk when using any rechargeable batteries at anytime and under any circumstances. ElementVape.com and any of ElementVape.com’s parent and subsidiary companies are not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making.
ElementVape.com and any or all of ElementVape.com’s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly.
When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries at the clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in controlled environment.
|Color||Silver / SS, Black|