Sense Blazer 200 TC Box Mod

The Sense Blazer 200 TC Box Mod presents a highly advanced output device with maximum output of 200W powered by a triple 18650 platform within a beautifully crafted chassis. The Sense Blazer 200 TC Box Mod utilizes the most powerful chipset from Sense, accommodating a triple 18650 platform with a wattage range of 7 to 200W, minimum atomizer resistance of 0.1ohm, and comprehensive temperature control with onboard support for Ni200 Nickel, Titanium, and Stainless Steel heating elements. The chassis measures 92mm by 50.24mm by 42mm, implementing a rounded design to fit comfortably in-hand with premium feel for lasting impression. The control interface features a unique side-mounted OLED display, with adjustment buttons placed adjacent for effective ergonomic design. The culmination of elegant designs and powerful capabilities, the Sense Blazer 200 TC Box mod is the perfect system catered towards performance-orientated users.

Check out the Sense Blazer 200 Starter Kit here.

Sense Blazer 200W TC Box Mod Features:

• Triple High-Amp 18650 Platform - Sold Separately 
• Dimensions: 92mm by 50.24mm by 42mm
• Wattage Output Range: 7-20W
• Min Atomizer Resistance: 0.1ohm
• Temperature Range: 200-600F
• Supports Ni200 Nickel, Titanium, and Stainless Steel Heating Elements
• Rounded Oval Frame
• Natural Soft Contour
• Side-Mounted OLED Display 
• Oversized Firing Button
• Magnetized Battery Cover
• No Atomizer Alert
• Over 10 S Protection
• Low Battery Alert
• Temperature Protection
• Short Circuit Protection
• Reverse Connection Protection
• MicroUSB Port 
• 510 Connection

Includes:

• 1 Blazer 200 Box Mod
• 1 MicroUSB Cable
• Instructional Manual

In order to use temperature control feature, it requires use of nickel, titanium, or stainless steel coils and must be built with non-resistant wire.

This product is for advanced user only! Please have a great understanding and technical knowledge on how to use this product in order to properly use it. Use it at your own risk!

We highly recommend using an external battery charger for 18650 battery mods, as it helps with balanced charging and prolong the life of the battery and mod.

Note: There is always an inherent risk when using any rechargeable batteries at anytime and under any circumstances. ElementVape.com and any of ElementVape.com’s parent and subsidiary companies are not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making.

ElementVape.com and any or all of ElementVape.com’s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly.

When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries at the clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in controlled environment

Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Please dispose battery cells, chargers or any other electronic devices in accordance of local laws and mandates.