Skip To Content

Rincoe MANTO X 228W TC Starter Kit

$59.95

$44.95

Availability: In Stock

Product info:

The Manto X 228W Starter Kit is a new vape kit from Rincoe, boasting a visually striking chassis construction, dual 18650 battery layout, extensive temperature control suite, and is paired with the Rincoe Metis MIX Sub-Ohm Tank.

*Required fields

The Manto X 228W Starter Kit is a new vape kit from Rincoe, boasting a visually striking chassis construction, dual 18650 battery layout, extensive temperature control suite, and is paired with the Rincoe Metis Mix Sub-Ohm Tank. The Manto X is constructed from durable zinc-alloy and layered with stoving varnish for an impeccable finish to withstand light to moderate drops and falls. On the exterior are various ventilation holes to allow the Manto X to properly cool. In addition, the Manto X incorporates a dual 18650 battery layout with the hinged bottom battery door to power the temperature control suite, unlocking the compatibility with nickel, titanium, and stainless steel wire options. With a maximum wattage range peaking at 228W, the Manto X is likely compatible with a myriad of atomizers on the market today, but it comes paired with the Rincoe Metis Mix Sub-Ohm Tank.

Rincoe Manto X Box Mod Features:

  • Dimensions - 75mm by 40mm by 37mm
  • Dual 18650 High-Amp Batteries - Not Included
  • Maximum Wattage Output: 1-228W
  • Maximum Voltage Output: 8.0V
  • Resistance Range: 
  • Nickel, Titanium, and Stainless Steel Compatibility
  • Zinc Alloy Chassis Construction
  • VW Mode
  • TC Mode
  • TCR Mode
  • Bypass Mode
  • Heat Ventilation Holes
  • Bottom Hinged Battery Door
  • MicroUSB Charging Port
  • Centered 510 Connection
  • Available in Red, Gunmetal, Black, Blue

Rincoe Metis Mix Mesh Sub-Ohm Tank Features:

  • 25mm Diameter
  • 6mL Bubble Glass Juice Capacity
  • Superior Stainless Steel Construction
  • Pyrex Glass Reinforcement
  • Threaded Top Fill System
  • 0.15 Single Mesh Coil - rated for 40-70W
  • 0.2ohm Dual Mesh Coil - rated for 60-90W
  • 0.15ohm Triple Mesh Coil - rated for 80-110W
  • 0.15ohm Q4 Mesh Coil - rated for 130-180W
  • Knurled Dual Slotted Airflow Control Ring
  • 510 Connection
  • Available in Stainless Steel

Includes:

  • 1 Rincoe Manto X 228W Box Mod
  • 1 Rincoe Metis Mix Sub-Ohm Tank
  • 4 Replacement O-Rings
  • 1 MicroUSB Cable
  • 2 User Manual
  • 1 MicroUSB Cable
  • 1 Warranty Card 
  • 1 Certificate Card

Please have a great understanding and technical knowledge on how to use this product in order to properly use it.

We highly recommend using an external battery charger for 18650 battery mods, as it helps with balanced charging and prolongs the life of the battery and mod, such as from worn out microUSB port. Never use damaged or improperly wrapped batteries with this device. We recommend all 18650/20700/21700 battery mods to use matching batteries with similar brand, model, and battery state at all times.

In order to use temperature control feature, it requires use of nickel, titanium, or stainless steel coils.

Note: There is always an inherent risk when using any rechargeable batteries at any time and under any circumstances. ElementVape.com and any of ElementVape.com’s parent and subsidiary companies are not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making.

ElementVape.com and any or all of ElementVape.com’s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly.

When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries at the clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in a controlled environment

Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Please dispose of battery cells, chargers or any other electronic devices in accordance with local laws and mandates.

Please have a great understanding and technical knowledge on how to use this product in order to properly use it.

We highly recommend using an external battery charger for 18650 battery mods, as it helps with balanced charging and prolongs the life of the battery and mod, such as from worn out microUSB port. Never use damaged or improperly wrapped batteries with this device. We recommend all 18650/20700/21700 battery mods to use matching batteries with similar brand, model, and battery state at all times.

In order to use temperature control feature, it requires use of nickel, titanium, or stainless steel coils.

Note: There is always an inherent risk when using any rechargeable batteries at any time and under any circumstances. ElementVape.com and any of ElementVape.com’s parent and subsidiary companies are not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making.

ElementVape.com and any or all of ElementVape.com’s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly.

When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries at the clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in a controlled environment

Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Please dispose of battery cells, chargers or any other electronic devices in accordance with local laws and mandates.

Loading...