Rincoe Manto S 228W TC Starter Kit

The Rincoe Manto S Starter Kit is an well designed vape kit, implementing a beautiful splatter design, extensive temperature control suite, and is paired with the advanced Rincoe Metis Mix Mesh Sub-Ohm Tank to generate tasty flavored clouds. The Manto S Starter Kit is of incredibly lightweight chassis construction layered with an elegant soft touch splattered finish. Within the Manto S is a proprietary chipset, unlocking a full 228W max, while allowing for resistances as low as 0.05ohms. With an comprehensive temperature control suite, the Manto S can accomodate wires like nickel, titanium, and stainless steel. Furthermore, when paired with the Rincoe Metis Mix Mesh Sub-Ohm Tank, allowing for the use of the new 0.15 or 0.2ohm mesh coil options, knurled top fill and adjustable bottom airflow control ring.

Rincoe Manto S 228W TC Box Mod Features:

• Dimensions - 80mm by 43mm by 41.5mm
• Dual High-Amp 18650 Batteries - Not Included
• Wattage Output Range: 1-228W
• Max Output Voltage: 8.4V
• Max Output Current: 50A
• Resistance Range - VW/Bypass Mode: 0.05-5.0ohm
• Resistance Range - TC Mode: 0.05-3.5ohm
• Temperature Control Range: 100°-300°C / 200°-600°F 
• Ni200, Titanium, and Stainless Steel Compatibility
• TCR Mode
• Bypass Mode
• Power Mode
• Lightweight PC Construction
• Oversized Firing Button
• Two Adjustment Buttons
• Magnetic Battery Door
• Short Circuit Protection
• 10 Seconds Cut Off 
• Low Voltage Protection
• Over Heating Protection
• Reverse Polarity Protection
• MicroUSB Cable
• Centered 510 Connection
• Available in Stainless Steel, Blue, Rainbow, Red, Black

Rincoe Metis Mix Mesh Sub-Ohm Tank Features:

• 25mm Diameter
• 6mL Bubble Glass Juice Capacity
• Superior Stainless Steel Construction
• Quartz Glass Reinforcement
• Threaded Top Fill System
• 0.15 Single Mesh Coil - rated for 40-70W
• 0.2ohm Dual Mesh Coil - rated for 60-90W
• 0.15ohm Triple Mesh Coil - rated for 80-110W
• 0.15ohm Q4 Mesh Coil - rated for 130-180W
• Knurled Dual Slotted Airflow Control Ring
• 810 Drip Tip
• 510 Connection
• Available in Stainless Steel

Includes:

• 1 Rincoe Manto S 228 TC Box Mod
• 1 Rincoe Metis Mix Mesh Tank
• 4 Replacement O-rings
• 1 MicroUSB Charging Cable
• 1 Certificate Card
• 1 Warranty Card
• 2 User Manual

Please have a great understanding and technical knowledge on how to use this product in order to properly use it.

We highly recommend using an external battery charger for 18650 battery mods, as it helps with balanced charging and prolongs the life of the battery and mod, such as from worn out microUSB port. Never use damaged or improperly wrapped batteries with this device. We recommend all 18650/20700/21700 battery mods to use matching batteries with similar brand, model, and battery state at all times.

In order to use temperature control feature, it requires use of nickel, titanium, or stainless steel coils.

Note: There is always an inherent risk when using any rechargeable batteries at any time and under any circumstances. ElementVape.com and any of ElementVape.com’s parent and subsidiary companies are not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making.

ElementVape.com and any or all of ElementVape.com’s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly.

When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries at the clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in a controlled environment

Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Please dispose of battery cells, chargers or any other electronic devices in accordance with local laws and mandates.