The Recoil Rebel RDA by GrimmGreen and OhmBoyOC is slotted as the larger, no frills platform based off the wildly popular Recoil RDA, introducing a new AFC top cap while updating the build deck with a staggered two-post, four terminal designs. The next collaboration by the popular GrimmGreen and OhmBoyOC, the Recoil Rebel RDA is enlarged with a 25mm diameter structure and a spacious 24mm build deck section. The building chamber implements a two-post design in staggered orientation, presenting four terminal openings measuring 2.5mm diameter for a wide accommodation of complex configurations and large coil structures. A new ULTEM insert is integrated onto the base of the build deck, preventing leaking while adding another layer of cooling properties. The Recoil Rebel utilizes two top cap styles. The Cloud Cap ("snake bite") returns with two angled airholes on both sides of the structure, measuring 3mm each to deliver a cloud-chasing experience. The Secondary Top Cap features four airslots with dynamic adjustability, allowing users to adjust the air channels to their preference.
GrimmGreen x OhmBoyOC Recoil Rebel RDA Features:
- 25mm Diameter
- Deep Juice Well
- Superior 304 Stainless Steel Construction
- PVD Coated - Gold & Black Colorway
- 24mm Build Deck Section
- Two-Post, Dual Terminal Per Post Desing
- Staggered Orientation
- Top-Secured via Slotted Flathead Screws
- ULTEM Inserts - Prevents Leaking
- Deckmilled Negatives
- PEEK Insulators
- Single or Dual Configurations
- Angled Airflow System - Direct-to-Coils
- Cloud Top Cap - Dual 3mm Airslots per Side
- AFC Secondary Top Cap - Quad 3mm Airslots per Side
- Propreitary Delrin Widebore Drip Tip
- Gold-Plated Brass 510 Connection
- 1 Recoil Rebel RDA
- 1 Cloud Top Cap
- 1 Secondary AFC Top Cap
- 1 Hex Key
- Spare Parts & O-Rings
This product is for advanced users only. It consists of risk of damaging your mods, devices, and batteries if it is being used improperly. Please make sure that you have great understanding and have done researches on this product before purchasing.
Note: When it comes to using RDA, RTA, and RDTA, we strongly recommended to wash and clean all the atomizers thoroughly and carefully. Likewise, please have a great sense of knowledge when it comes to handling and using these products.
We always strongly recommend testing the coils with ohm-meter before using them with your mods, devices and batteries. Coils with low resistance are not suitable with all mods, devices and batteries. Please make sure that your mods, devices and batteries can handle low resistance before using them.
Note: There is always an inherent risk when using any rechargeable batteries at anytime and under any circumstances. ElementVape.com and any of ElementVape.com’s parent and subsidiary companies are not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making.
ElementVape.com and any or all of ElementVape.com’s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly.
When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries at the clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in controlled environment.