The Rapture RDA is the latest performance rebuildable dripping atomizer from Armageddon MFG, delivering an inverted bridge clamp two-post build deck design with the integration of a two-airflow system. Measuring 24mm in diameter, the Rapture RDA follows in suits with the high-quality constructions from the makers of the Armageddon Apocalypse RDA series with durable Stainless Steel exteriors and a gold-plated build deck. The Rapture RDA introduces a clamp two-post build deck in inverted orientation, in which coil leads are set into the moveable bridge clamp section and tightened via top-mounted slotted screws. Airflow enters the structure through two dynamic channels, featuring a dual 7mm by 2mm adjustable bottom airflow and a 6mm side airflow with teardrop configurations.
Armageddon MFG Rapture RDA Features:
- 24mm Diameter
- 4mm Deep Juice Well
- Superior Stainless Steel Construction
- 21mm Gold-Plated Build Deck
- Two-Post, Dual Terminals Per Post Design
- Inverted Bridge-Clamp Mechanism - Top-Mounted by Slotted Screws
- PEEK Insulated Positive-Post
- One 6mm Slotted Side Airflow - Teardrop Configuration
- Dual Slotted Bottom Airflow - Fully Adjustable
- Two Internal Airtubes
- ULTEM Widebore Drip Tip
- Serialized Engravings
- Gold-Plated 510 Contact Pin
- 1 Rapture RDA
- 1 Slotted Screwdriver
- Spare Parts & O-Rings
Note: When it comes to using RDA, RTA, and RDTA, we strongly recommended to wash and clean all the atomizers thoroughly and carefully. Likewise, please have a great sense of knowledge when it comes to handling and using these products.
We always strongly recommend testing the coils with ohm-meter before using them with your mods, devices and batteries. Coils with low resistance are not suitable with all mods, devices and batteries. Please make sure that your mods, devices and batteries can handle low resistance before using them.
Note: There is always an inherent risk when using any rechargeable batteries at anytime and under any circumstances. ElementVape.com and any of ElementVape.com’s parent and subsidiary companies are not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making.
ElementVape.com and any or all of ElementVape.com’s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly.
When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries at the clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in controlled environment.