Pulse 22 BF RDA by Vandy Vape & Tony B.

Out of stock
Only %1 left
The Pulse 22 BF RDA by Vandy Vape & Tony B., the highly respected man behind the Vapor Trail Channels, enters the market with one of the most capable rebuildable platform, integrating an impressive side-mounted Kennedy-style airflow design with a postless, dual terminal build deck.
Show More

The Pulse 22 BF RDA by Vandy Vape & Tony B., the highly respected individual behind the Vapor Trail Chanel, enters the market with one of the most capable rebuildable platform, integrating an impressive side-mounted Kennedy-style airflow design with a postless, dual terminal build deck. Measuring 22mm in diameter, the Pulse RDA is crafted with high-quality Stainless Steel construction in a three-piece structure and with creative elements from Tony B. for an ultra-effective chassis design. The Pulse BF RDA integrates a conceptualized airflow style inspired from the Kennedy RDA, featuring a side-mounted dual 3.5mm airslots that feeds into each pair of airflow tubes. The result is a concentrated and direct airway path to the deck with quad airflow tubes for maximal vapor production, while simultaneously doubling as an anti-spill mechanism due to the slanted orientation. The build deck features a simple, user-friendly design, implementing a postless, dual terminal design catering to single coil configurations and flavor-orientated configuration. Coil leads are set into the deck and tightened via side-secured Phillips screws. Similar to other Vandy Vape's innovative atomizer, the Pulse RDA includes a trio of heat-resistant Delrin widebore drip tip in a variety of height and width. Brilliantly constructed with a highly intuitive airflow system along with ergonomic design functionalities, the Vandy Vape Pulse BF RDA is a must-have collection for building enthusiasts.

Pulse BF RDA by Vandy Vape Features:

  • A Tony B.'s Project
  • 22mm Diameter
  • Deep Juice Well
  • Superior Stainless Steel Construction
  • Pyrex Glass Reinforcement
  • Innovative Postless, Dual Terminal Design
  • PEEK-Insulated Positive Terminal Post
  • Negative Terminal Post
  • Single Coil Configurations
  • Side-Mounted Kennedy-Style Airflow
  • Dual Slotted Side Airslots
  • Quad Airflow Tubes Inside Chamber
  • 14mm Wide Delrin Widebore Drip Tip
  • 510 Drip Tip Adapter
  • Innovative Squonk Pin Set-Up
  • Gold-Plated 510 Contact Pin
  • Available in Stainless Steel, Black, Gold, Blue, Red, Rainbow

Includes:

  • 1 Pulse BF RDA
  • 1 14mm Delrin Widebore Drip Tip
  • 1 Accessory Bag

This product is for advanced users only. It consists of risk of damaging your mods, devices, and batteries if it is being used improperly. Please make sure that you have great understanding and have done researches on this product before purchasing.

Note: When it comes to using RDA, RDTA, and RDTA, we strongly recommended to wash and clean all the atomizers thoroughly and carefully. Likewise, please have a great sense of knowledge when it comes to handling and using these products.

We always strongly recommend testing the coils with ohm-meter before using them with your mods, devices and batteries. Coils with low resistance are not suitable with all mods, devices and batteries. Please make sure that your mods, devices and batteries can handle low resistance before using them.

Note: There is always an inherent risk when using any rechargeable batteries at anytime and under any circumstances. ElementVape.com and any of ElementVape.com’s parent and subsidiary companies are not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making.

ElementVape.com and any or all of ElementVape.com’s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly.

When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries at the clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in controlled environment.

Show Less

Ratings & Reviews

Other products from same brand

Shall we send you a message when we have discounts available?

Remind me later

Thank you! Please check your email inbox to confirm.

Oops! Notifications are disabled.