Pioneer4you iPV D4 80W TC Starter Kit

The Pioneer4You iPV D4 80W TC Starter Kit is the modernized featured set, implementing the upgraded device of the iPV D series while pairing it with the flavor-orientated PVair S2 Sub-Ohm Tank. Designed as a direct successor to the popular iPV D3, the D4 is constructed with a soft-contour curve to fit comfortability in-hand, with the enlargement of firing mechanism and adjustment buttons for added ergonomic elements. The iPV D4 utilizes the YiHi SX130H chipset, featuring an accurate output with a maximum wattage of 80W, with integrated temperature control that supports Ni200 Nickel and Titanium heating elements. Powered by a single 18650 (sold separately), a newly improved magnetic door provides easy access and replacement. The included PV Air S2 Sub-Ohm Tank is built for a flavor-enhanced experience, featuring 2mL juice capacity, threaded top-fill method, top-mounted airflow, and utilization of PVair S2 Coil Technology. A fully inclusive kit for modern demands, the iPV D4 80W TC Starter Kit is set to be the new Pioneer4You's flagship set.

For iPV D4 80W TC Box Mod only, click here.

Check out the PVair S2 Replacement Coil here.

IPV D4 80W Temp Control Box Mod Features:

• Single 18650 High Amp IMR Battery - Sold Separately
• Latest YiHi SX 130H Chipset
• Wattage Output Range: 5-80W
• Voltage Output Range: 1-7V
• Output Joules: 10-80JJ
• Min VW Atomizer Resistance: 0.15 ohm
• Min TC Atomizer Resistance: 0.05 ohm
• Temperature Control Range: 212-572F
• Supports Ni200, Titanium, and Stainless Steel Heating Elements
• Superior Aluminum Construction
• Magenetized Battery Cover
• Intuitive LED Display
• Low Voltage Protection
• Low Resistance Protection
• High Input Voltage Warning
• Output Short Circuit Protection
• Reverse Battery Protection
• Temperature Overheat protection
• MicroUSB Charging Port
• Spring Loaded 510 Contact

Pioneer4You PVair S2 Sub-Ohm Tank Features:

• 22mm Diameter 
• 2mL Juice Capacity 
• Superior Stainless Steel Construction 
• Pyrex Glass Reinforcement 
• Flavor-Focused Structural Design
• PVair S2 Coil Structure 
• 0.5ohm Kanthal Coil - rated for 10-80W
• 0.2ohm SS316L Coil - rated for 10-80J
• Threaded Top-Fill Method 
• Dual Top Airflow Control
• Elongated Widebore Drip Tip 
• 510 Connection

Includes:

• 1 iPV D4 Box Mod
• 1 PVair S2 Sub-Ohm Tank
• 1 0.5ohm Kanthal Coil Head
• 1 0.2ohm SS316 Coil Head
• 1 MicroUSB Cable
• Instructional Manual

In order to use temperature control feature, it requires use of nickel coils or titanium coils and must be built with non-resistant wire.

We highly recommend using an external battery charger for 18650 battery mods, as it helps with balanced charging and prolong the life of the battery and mod.

Warning: Please make sure you have a great understanding and technical knowledge on how to use mods and batteries that can handle Sub-Ohm coils. Do not use short or flat 510 connection on any hybrid or hybrid style device. If you are not familiar or unsure of particular products or set-ups, please do not use it. Always use proper precautions and handling.

Note: When it comes to using RDA, RDTA, and RDTA, we strongly recommended to wash and clean all the atomizers thoroughly and carefully. Likewise, please have a great sense of knowledge when it comes to handling and using these products.

We always strongly recommend testing the coils with ohm-meter before using them with your mods, devices and batteries. Coils with low resistance are not suitable with all mods, devices and batteries. Please make sure that your mods, devices and batteries can handle low resistance before using them.

This product is for advanced user only! Please have a great understanding and technical knowledge on how to use this product in order to properly use it. Use it at your own risk!

Note: There is always an inherent risk when using any rechargeable batteries at anytime and under any circumstances. ElementVape.com and any of ElementVape.com’s parent and subsidiary companies are not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making.

ElementVape.com and any or all of ElementVape.com’s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly.

When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries at the clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in controlled environment

Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Please dispose battery cells, chargers or any other electronic devices in accordance of local laws and mandates.