Pioneer4you iPV D3S 80W TC Box Mod

The Pioneer4you iPV D3S 80W TC Box Mod is the revision update of the iPV D3, delivering an updated firmware with the YiHi SX150H Chipset for more advanced features. Featuring up to 80 watts of variable output and a minimum atomizer resistance of 0.05ohm, the iPV D3S has implemented an improved temperature module to support Ni200 Nickel and Titanium, providing fantastic performance with a wide range of commonly utilized heating elements and compatibility with today's top tanks. The new YiHi SX150H onboard includes Voltage Step Down technology, which give sub-ohm vapers a wider precise range of usable power levels and the ability to vape at any wattage regardless of the remaining charge on the battery, creating a truly seamless and incredible experience. In addition, Joules mode have been enhanced, offering up to a staggering 75 Joules for precise airflow deliver and furthering the versatility of the output device. The design features a soft curve, which improves ergonomics and reduces hand fatigue, and a newly added magnetic panel for easy access and replacement of a single 18650 battery that powers the iPV D3S.

IPV D3S 80W TC Box Mod Features:

• 18650 High Amp IMR Single Battery - Sold Separately
• Latest YiHi SX150H Chipset
• Wattage Output Range: 7-80W
• Voltage Output Range: 1-7V
• Output Joules: 10075J
• Min VW Atomizer Resistance: 0.15 ohm
• Min TC Atomizer Resistance: 0.05 ohm
• Temperature Control Range: 212-572F
• Compatible with Ni200 and Ti Heating Elements
• Superior Aluminum Construction
• Magenetized Battery Cover
• Intuitive LED Display
• Step Down Voltage Technology
• Low Voltage Protection
• Low Resistance Protection
• High Input Voltage Warning
• Output Short Circuit Protection
• Reverse Battery Protection
• Temperature Overheat protection
• MicroUSB Charging Port
• Spring Loaded 510 Contact

Includes:

• 1 IPV D3S TC 80W TC Box Mod
• 1 MicroUSB Charger
• Instruction Manual

In order to use temperature control feature, it requires use of nickel, titanium, or stainless steel coils.

Note: There is always an inherent risk when using any rechargeable batteries at anytime and under any circumstances. ElementVape.com and any of ElementVape.com’s parent and subsidiary companies are not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making.

ElementVape.com and any or all of ElementVape.com’s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly.

When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries at the clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in controlled environment

Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Please dispose battery cells, chargers or any other electronic devices in accordance of local laws and mandates.