The Oumier WASP Nano 22mm RDA is a finely crafted creation, combining a superior stainless steel and ULTEM construction, expansive build deck, and is geared towards maximizing flavor production in such a compact and minuscule rebuildable dripping atomizer. The Oumier WASP Nano measures in at 22mm and is constructed of superior stainless steel and ULTEM, perfect for maintaining heat resistance from the temperature of the coil. In addition, the build deck consists of two large terminals with top-secured flathead screws on open terminals to accept single coil configurations that utilize thicker coils or exotic builds. Although still a rather small and compact atomizer, the orientation of all the features makes this a flavor based atomizer such as the conical top cap airflow control drip tip hybrid. With this ULTEM top cap, it is resistant to heat, the dual slots are rather large but can be easily adjusted to maintain the degree of airflow rushing through the atomizer, and the conical shape allows for the flavor to be focused and condensed out the drip tip.
Oumier WASP NANO 22mm RDA Features:
- 22mm Diameter
- 5mm Deep Juice Well
- Superior Stainless Steel Construction
- Dual Post Expansive Build Deck - One Open Terminal Per Post
- Ideal for Simplified or Thicker Wire Builds
- Top Secured via Flathead Screws
- PEEK Insulator
- Single Coil Configuration
- Double O-Ring Top Cap Connection
- Dual Slotted Airflow System
- Side Airflow Vents To Side Of Coil
- Slotted Top Cap Airflow Control
- Frosted Conical ULTEM Flavor-Oriented Top Cap Drip Tip
- Squonkable BF 510 Connection
- Available in Gold, Black, White, Resin, Silver
- 1 Oumier Wasp Nano RDA
- 1 Spare Parts Kit
- 1 Organic Cotton
- 1 Flathead screwdriver
- 1 510 BF Squonk Pin
Note: When it comes to using RDA, RTA, and RDTA, we strongly recommended to wash and clean all the atomizers thoroughly and carefully. Likewise, please have a great sense of knowledge when it comes to handling and using these products.
We always strongly recommend testing the coils with ohm-meter before using them with your mods, devices and batteries. Coils with low resistance are not suitable with all mods, devices and batteries. Please make sure that your mods, devices and batteries can handle low resistance before using them.
Note: There is always an inherent risk when using any rechargeable batteries at anytime and under any circumstances. ElementVape.com and any of ElementVape.com’s parent and subsidiary companies are not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making.
ElementVape.com and any or all of ElementVape.com’s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly.
When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries at the clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in controlled environment.