The Oumier BOMBUS 24mm RTA is a well designed vaping creation, implementing a leak-proof locking top fill system, an expansive two post build deck, and a uniquely shaped airflow layout that is sure to create flavorful dense clouds. Crafted from superior stainless steel, the BOMBUS measures in at 24mm and can is geared towards flavor creation. The building deck is oriented to accept a single coil configuration with two posts with a single large open terminal on each, affixed from the top via flathead screws. This allows the BOMBUS to accept larger coil builds or builds that utilize bigger coil wire or exotic configurations. Within the pyrex glass, 2mL of juice can be loaded by rotating the top cap 90° to reveal a large open fill port. At the base of the atomizer is the dual slotted airflow system, splitting each side of the control ring into a set of three smaller airflow slots to further control the amount of air rushing through the atomizer at one time. The BOMBUS features a 510 sized delrin drip tip at the top and a gold-plated 510 connection at the base for an undisputed connection.
Oumier BOMBUS 24mm RTA Features:
- 24.5mm Diameter
- 2mL Juice Capacity
- Superior Stainless Steel Construction
- Dual Post Build Deck - 1 Open Terminal Per Post
- Ideal for Simplified or Large Coil Builds
- Top Secured via Flathead Screws
- PEEK Insulator
- Single Coil Configuration
- Threaded Top/Inner Cap Connection
- Triple Slotted Bottom Airflow Control Ring
- 90° Quarter Turn Locking Top Fill System
- 510 Connection
- 510 Widebore Delrin Drip Tip
- Available in Stainless Steel, Black, Rainbow, and Gold
- 1 Oumier BOMBUS 24mm RTA
- 1 Spare Parts Kit
- 1 Organic Cotton
- 1 Replacement Glass
- 1 User Manual
Note: When it comes to using RDA, RTA, and RDTA, we strongly recommended to wash and clean all the atomizers thoroughly and carefully. Likewise, please have a great sense of knowledge when it comes to handling and using these products.
We always strongly recommend testing the coils with ohm-meter before using them with your mods, devices and batteries. Coils with low resistance are not suitable with all mods, devices and batteries. Please make sure that your mods, devices and batteries can handle low resistance before using them.
Note: There is always an inherent risk when using any rechargeable batteries at anytime and under any circumstances. ElementVape.com and any of ElementVape.com’s parent and subsidiary companies are not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making.
ElementVape.com and any or all of ElementVape.com’s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly.
When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries at the clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in controlled environment.