A phenomenal collaboration by OhmBoy and Desire Design introduces the Rage 155W Squonk Box Mod, fully equipped with an advanced chipset capable of firing up to 155W and temperature control powered by dual 18650 batteries. The Rage Squonk Box Mod is carefully crafted with Kirsite, similar components to Zinc Alloy, for a high-end impression. The cut-out section houses a bottom-loaded 7mL squonk bottle, working in conjunction with the ergonomically-shaped device for phenomenal operational usage to pair with a BF RDA. The internal chipset has a maximum output of 155W and full temperature suite with TCR adjustments, fully controllable via the 0.59" OLED display and adjustment buttons.
OhmBoyOC x Desire Design Rage 155W Squonk Box Mod Features:
- Dimensions - 109mm by 53mm by 30mm
- Dual 18650 High-Amp Battery - Not Included
- Wattage Output Range: 5-155W
- Voltage Output Range: 0-8V
- Temperature Control Range: 200-600F
- Minimum Atomizer Resistance: 0.08ohm
- TCR Adjustments
- BYPASS Mode
- Superior Kersite/Zinc Alloy Construction
- 7mL Squonk Bottle
- Intuitive 0.59" OLED Display
- Oversized Circle Firing Button
- Two Adjustment Buttons
- Short Circuit Protection
- Low Voltage Protection
- Over Charge Protection
- Over Vape Protection
- Squonk-Ready Bottom-Feeding Section
- MicroUSB Port
- Stainless Steel 510 Connection - Fits up to 25mm
- 1 Rage 155W Box Mod
- 1 MicroUSB Cable
- Instructional Manual
Please have a great understanding and technical knowledge on how to use this product in order to properly use it.
In order to use temperature control feature, it requires use of nickel, titanium, or stainless steel coils.
We highly recommend using an external battery charger for 18650 battery mods, as it helps with balanced charging and prolongs the life of the battery and mod, such as from worn out microUSB port.
Note: There is always an inherent risk when using any rechargeable batteries at any time and under any circumstances. ElementVape.com and any of ElementVape.com’s parent and subsidiary companies are not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making.
ElementVape.com and any or all of ElementVape.com’s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly.
When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries at the clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in a controlled environment
Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Please dispose of battery cells, chargers or any other electronic devices in accordance with local laws and mandates.