The Wotofo Nudge 24mm RDA is brilliant constructed with design inspirations from Suck My Mod, developing a unique staggered Z-post build deck with bottom-feeding functionality and caters towards flavor-chasers. Measuring 24mm in diameter, the Nudge RDA is available in a variety of vibrant colorways and design elements that showcases the manufacturing prowess of Wotofo. The implementation of the staggered Z-post build deck is highly intuitive for vape building enthusiasts, featuring two floating posts at the center and two side-tensioned posts. Coil leads are properly top-secured via Phillips screws and the entire design creates a concentrated airflow delivery that fully enhances flavor production. Airflow enters the Nudge RDA's structure through a slotted airflow hole located on each side of the apparatus. Completing the structure is an 810 Black Delrin drip tip for the Stainless, Black, and Gunmetal colorway while other colors features a unique 810 Resin drip tip.
Rebuildable Vape Wires
Wotofo Nudge 24mm RDA Features:
- Collaboration between Wotofo & Suck My Mod
- 24mm Diameter
- Deep Juice Well
- Superior 316 Stainless Steel Construction
- Unique Staggered Z-Post Build Deck Design
- Top-Secured via Phillips Screw
- PEEK Insulators
- Dual Slotted Airflow Delivery
- Direct-to-Coil Chamber Effect
- 810 Delrin Widebore Drip Tip - for SS, Black, & Gunmetal
- 810 Resin Widebore Drip Tip - for other colorful versions
- 510 Drip Tip Adapter
- Squonk-Ready Bottom-Feeding 510 Pin
- Bifunctional E-Juice Splitter Design
- 24K Gold-Plated 510 Connection
- Available in Stainless, Black, Gunmetal, Red, Blue, Green
- 1 Nudge BF RDA
- 1 510 Squonk-Ready Pin
- 1 810 Widebore Drip Tip
- 1 510 Drip Tip Adapter
- 1 Screwdriver
- 1 Bag of Prebuilt Comp Wires
- 1 Bag of Japanese Cotton
- Instructional Manual
Note: When it comes to using RDA, RTA, and RDTA, we strongly recommended to wash and clean all the atomizers thoroughly and carefully. Likewise, please have a great sense of knowledge when it comes to handling and using these products.
We always strongly recommend testing the coils with ohm-meter before using them with your mods, devices and batteries. Coils with low resistance are not suitable with all mods, devices and batteries. Please make sure that your mods, devices and batteries can handle low resistance before using them.
Note: There is always an inherent risk when using any rechargeable batteries at anytime and under any circumstances. ElementVape.com and any of ElementVape.com’s parent and subsidiary companies are not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making.
ElementVape.com and any or all of ElementVape.com’s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly.
When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries at the clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in controlled environment.