Mission XV KRMA 22mm RDA (Discontinued)

$91.90
Out of stock
The Mission XV KRMA 22mm RDA is a wonderful rebuildable featuring a unique deck composition, squonking capabilities, and a precision-controlled adjustable airflow that surges through the interior channels.
Show More

The Mission XV KRMA 22mm RDA is a wonderful rebuildable featuring a unique deck composition, squonking capabilities, and a precision-controlled adjustable airflow that surges through the interior channels. The build deck consists of two posts with a single terminal on each post, measuring in at 4mm by 1.5mm and is top secured via flathead screws. The squonking pin can be swapped onto the KRma RDA and allows eLiquid to be pumped through the bottom of the RDA. Finally, the precision controlled dual airflow is adjustable and can be found on opposing sides of the top cap, measuring in at 4.5mm by 1.5mm each, the airflow enters through the side and is channeled to the coil from the sides.

Mission XV KRma 22mm RDA Features:

  • 22mm RDA
  • 5mm Deep Juice Well
  • Superior 304 Stainless Steel Construction
  • Spacious Build Deck
  • Two-Post - Single Terminal Per Post
  • Top Secured via Flathead Screws
  • Open-Sided Terminal
  • Single Coil Configuration 
  • PEEK Insulator
  • Dual Adjustable Airflow - 4mm by 1.5mm Each
  • Black Delrin Drip Tip 
  • ULTEM Drip Tip 
  • Stainless Steep BF Squonk 510 Pin
  • Stainless Steel 510 Connection
  • Available in Black and Stainless Steel

Includes:

  • 1 Mission XV KRMA RDA
  • 1 22mm Black Delrin Top Cap
  • 1 2mm Stainless Steel Top Cap
  • 1 Black Delrin Drip Tip
  • 1 ULTEM Drip Tip
  • 1 Bottom-Fed Plug Screw
  • 4 Flathead Grub Screw Spares
  • 4 O-Ring Spares
  • 1 Bottom Fed Pin Plug Tool

Note: When it comes to using RDA, RTA, and RDTA, we strongly recommended to wash and clean all the atomizers thoroughly and carefully. Likewise, please have a great sense of knowledge when it comes to handling and using these products.

We always strongly recommend testing the coils with ohm-meter before using them with your mods, devices and batteries. Coils with low resistance are not suitable with all mods, devices and batteries. Please make sure that your mods, devices and batteries can handle low resistance before using them.

Note: There is always an inherent risk when using any rechargeable batteries at anytime and under any circumstances. ElementVape.com and any of ElementVape.com’s parent and subsidiary companies are not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making.

ElementVape.com and any or all of ElementVape.com’s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly.

When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries at the clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in controlled environment.

Show Less

Ratings & Reviews

You may also like

Shall we send you a message when we have discounts available?

Remind me later

Thank you! Please check your email inbox to confirm.

Oops! Notifications are disabled.