The Mini Volt V2 40W TC Starter Kit by Council of Vapor is the technological evolution of the most well-balanced compact featured set, measuring a minuscule 56mm by 35mm by 22mm while packing 40W maximum output, improved 1200mAh battery life, faster charging rate, and retaining the same gorgeous carbon fiber inlay chassis. The internal on-board chipset is greatly improved, with 90 minute rapid charge capability, improved undervoltage cut-offs and a plethora of safety features for a consistent and reliable performance. The implementation undervoltage cut-off set at 3.2V ergonomically reduces problems with underpowered output, greatly making the Mini Volt V2 highly dependable with a manufacturer rated 1200mAh internal battery. The Mini Volt V2 fits comfortably in hand, with a gorgeous showcase piece featuring durable zinc alloy construction and stunning carbon fiber inlay. With excellent upgrades between battery functionality and performance, the Mini Volt V2 by Council of Vapor is the pinnacle of ultra compact architectural structure.
Mini Volt 2 40W Box Mod Features:
- 1200mAh Internal Safe Battery
- Dimensions: 35mm x 22mm x 56mm
- Wattage Output Range: 5~40W
- Minimum Atomizer Resistance: 0.2ohm
- Carbon Fiber Grip
- Premium Rubberized Paint Coat
- Ultra-Compact Size
- Three Ramp Modes: Soft, Standard, and Power
- 90 Minute Rapid Charge Capability
- Undervoltage Cut-Off at 3.2V
- Intuitive OLED Display
- Micro-USB Port
- 510 Connection
- Availabe in Black, White, Red, and Gunmetal
Mini Volt Atomizer Features:
- 20mm Diameter
- 2mL Juice Capacity
- Stainless Steel Construction
- Pyrex Glass Reinforcement
- Quad Airslots Adjustable Airflow at Base
- Widebore Air Cooled AFC Drip Tip
- Splitback Protection
- Convenient Top-Fill Method
- Vertical Coil Structure - 0.8ohm
- 510 Contact Pin
In order to use temperature control feature, it requires use of nickel coils or titanium coils and must be built with non-resistant wire.
Do not use Ni200, Titanium, and Stainless Steel with non-temperature control devices/mods. This is a risk of battery explosion! Please make sure that the devices/mods that you are using is capable of controlling coil temperature.
Warning: This tank is a Sub-Ohm resistance atomizer and only work on mechanical mod or devices that can handle Sub-Ohm resistance of 0.5ohm or lower. Please make sure you have a great understanding and technical knowledge on how to use mods and batteries that can handle Sub-Ohm coils. Do not use short or flat 510 connection on any hybrid or hybrid style device. If you are not familiar or unsure of particular products or set-ups, please do not use it. Always use proper precautions and handling.
Note: When it comes to using RDA, RDTA, and RDTA, we strongly recommended to wash and clean all the atomizers thoroughly and carefully. Likewise, please have a great sense of knowledge when it comes to handling and using these products.
We always strongly recommend testing the coils with ohm-meter before using them with your mods, devices and batteries. Coils with low resistance are not suitable with all mods, devices and batteries. Please make sure that your mods, devices and batteries can handle low resistance before using them.
This product is for advanced user only! Please have a great understanding and technical knowledge on how to use this product in order to properly use it. Use it at your own risk!
Note: There is always an inherent risk when using any rechargeable batteries at anytime and under any circumstances. ElementVape.com and any of ElementVape.com’s parent and subsidiary companies are not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making.
ElementVape.com and any or all of ElementVape.com’s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly.
When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries at the clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in controlled environment
Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Please dispose battery cells, chargers or any other electronic devices in accordance of local laws and mandates.