The Mi-One Starter Kit by Smoking Vapor is the evolution of small for factor devices, featuring a discrete all-in-one design that pairs 1100mAh rechargeable battery paired with top airflow adjustment and convenient top-filling system. Measuring 47mm by 42mm by 22mm, the Mi-One is one of the smallest fully integrated systems available today, with an emphasis on balancing performance, size, and portability. The intuitive construction of the Mi One features a multitude of patterns and designs on the panels, each showcasing a set color theme in a unique pattern that is visually appealing to the eye. The Mi-One features an integrated tank reservoir, with 3.5 milliliter capacity of eLiquids and refilled conveniently via top-filled method. It powered by a built-in 1100mAh battery, featuring direct voltage output system with a maximum of 15A and 4.2V. It integrates a top-style firing button, with child-lock design for ergonomic form factor. The tank section is accessed via threaded top cap which features a built-in coil slot for additional convenience, including two 0.6ohm Mi-One Coils. Additionally, users can adjust airflow located on the air pipe. Perfect for entry level users or individuals look for a discrete and portable set, the Mi-One Starter Kit by Smoking Vapor combines intuitive designs, ample performance, and beautiful construction.
Smoking Vapor MVape Mi-One Starter Kit Features:
- All-in-One Design
- Dimensions: 47mm by 42mm by 22mm
- Plug-and-Play Ecosystem
- 3.5mL Juice Capacity
- Integrated 110mAh Rechargeable Battery
- Voltage Output Range: 3-4.2V
- Maximum Current: 15A
- Minimum Resistance: 0.3ohm
- Voltage-Based Output
- Top-Style Firing Mechanism
- Colorful LED Light Battery Indicator
- Top-Filled Method
- Child-Lock Protection
- Top Airflow Adjustment
- 0.6ohm Mi-One Coil
- Over Heat Protection
- Short Circuit Protection
- Low Voltage Protection
- Low Resistance Protection
- MicroUSB Charging Port
- Note: Install and Prime Coil Before Use.
- 1 Mi-One Device
- 1 Anti-Spitback Drip Tip
- 2 0.6ohm Mi-One Coils
- 1 Soft Stylish Wrist-Lanyard
- 1 MicroUSB Cable
- Instructional Manual
In order to use temperature control feature, it requires use of nickel coils or titanium coils and must be built with non-resistant wire.
We highly recommend using an external battery charger for 18650 battery mods, as it helps with balanced charging and prolong the life of the battery and mod.
Warning: Please make sure you have a great understanding and technical knowledge on how to use mods and batteries that can handle Sub-Ohm coils. Do not use short or flat 510 connection on any hybrid or hybrid style device. If you are not familiar or unsure of particular products or set-ups, please do not use it. Always use proper precautions and handling.
Note: When it comes to using RDA, RDTA, and RDTA, we strongly recommended to wash and clean all the atomizers thoroughly and carefully. Likewise, please have a great sense of knowledge when it comes to handling and using these products.
We always strongly recommend testing the coils with ohm-meter before using them with your mods, devices and batteries. Coils with low resistance are not suitable with all mods, devices and batteries. Please make sure that your mods, devices and batteries can handle low resistance before using them.
This product is for advanced user only! Please have a great understanding and technical knowledge on how to use this product in order to properly use it. Use it at your own risk!
Note: There is always an inherent risk when using any rechargeable batteries at anytime and under any circumstances. ElementVape.com and any of ElementVape.com’s parent and subsidiary companies are not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making.
ElementVape.com and any or all of ElementVape.com’s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly.
When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries at the clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in controlled environment
Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Please dispose battery cells, chargers or any other electronic devices in accordance of local laws and mandates.