Mesh PRO 25mm RDA by Digiflavor

Digiflavor have developed a new rebuildable dripper capable of accommodating both mesh wires and standard wires, introducing the Mesh PRO 25mm RDA with a dual clamp-style postless build deck with squonk-ready functionality. An advancement in ergonomic designs, the Digiflavor Mesh PRO RDA implements an elevated build deck with postless design for a spacious chamber, necessary for accommodating mesh wires. To properly utilize the Mesh PRO RDA, the mesh sheet is placed between the individual clamp bar on each opening, side-secured via a large slotted flathead screws to create an effective attachment. Due to the design of the terminal openings and clamping mechanism, the Mesh PRO RDA allows for the accommodation of standard coils, whether it is single or dual configurations. The juice well is cleverly designed to allow efficient squonk-ready set-up, with an included bottom-feeding 510 pin that feeds directly into the juice well.

Quick Links:
Rebuildable Vape Wires
Rebuildable Tools

Digiflavor Mesh Pro 25mm RDA Features:

• 25mm Diameter
• Deep Juice Well
• Superior 304 Stainless Steel Construction
• Elevated Gold-Plated Build Deck
• Dual Terminals Postless Design
• Clamp-Shelf Mechanism - Properly Secure Mesh Sheet
• Lock Down via Large Slotted Flathead Screw per Post
• 8-Hole Airslots on Each Side
• 18mm Wide 810 Delrin Drip Tip
• 10mm High 510 Delrin Drip Tip
• 510 Drip Tip Adapter
• Bottom-Feeding Squonk 510 Pin
• Gold-Plated 510 Contact Pin
• Available in Stainless Steel, Black, Gunmetal, Blue

Includes:

• 1 Mesh Pro RDA
• 1 810 Delrin Widebore Drip Tip
• 1 510 Delrin Widebore Drip Tip
• 1 510 Drip Tip Adapter
• 1 510 Squonk-Ready Pin
• 1 T-Tool Screwdriver
• 3 Mesh Wires - KA1, Ni80, SS316
• Instructional Manual

Note: When it comes to using RDA, RTA, and RDTA, we strongly recommended to wash and clean all the atomizers thoroughly and carefully. Likewise, please have a great sense of knowledge when it comes to handling and using these products.

We always strongly recommend testing the coils with ohm-meter before using them with your mods, devices and batteries. Coils with low resistance are not suitable with all mods, devices and batteries. Please make sure that your mods, devices and batteries can handle low resistance before using them.

Note: There is always an inherent risk when using any rechargeable batteries at anytime and under any circumstances. ElementVape.com and any of ElementVape.com’s parent and subsidiary companies are not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making.

ElementVape.com and any or all of ElementVape.com’s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly.

When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries at the clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in controlled environment.