Medusa Coils - Pre-Built Coils

The Pre-Built Coils by Medusa Coils delivers performance-enhanced precoiled designs with machine-twisted precision for a tight and highly consistent building material. It is premade to eliminate the time consuming hassle of wire buildings, offered in a variety of complex configurations that optimizes flavor recreation and vapor-inducing set-ups. The Medusa Pre-Built Coils comes in variety of unique styles: Clapton, Fused Clapton, Staggered Fused Clapton, Alien Clapton, Ribbon Twist, Framed Staple Clapton, Helix Staple, and Tank Track.

Each pack contains two prebuilt coils and one Japanese Organic Cotton Pad.

Configurations:

• Clapton - 0.6ohm - 26GA x 32GA
• Fused Clapton - 0.3ohm - 26GA*2 x 32GA
• Staggered Fused Clapton - 0.45ohm - (26GA x 32GA)*2 x 32GA
• Alien Clapton - 0.25ohm - 24GA*3 x 32GA
• Ribbon Twist Clapton - 0.15ohm - 28GA
• Framed Staple Clapton - (4 Ply Ribbon + 2*26GA) x 32GA
• Helix Staple Coils - 0.25ohm - 4 Ply Ribbon + 28GA Twist
• Tank Track - 0.45ohm - 0.3*0.8 x 32GA
• Parallel Fused Clapton - 0.2ohm - 24G+(2*26G + 38G)
• Parallel Tank Track - 0.2ohm - 24G+(Ribbon + 32G)
• Braided Coils - 0.26ohm - (0.3*0.6)+(40GA*32)
• Juggernaut Coils - 0.4ohm - 24G + 32G + Ribbon
• Framed Staple Coil - (0.3ohm - 4 Ply Ribbon + 2*25G) * 32G
• Snow Grip - 0.65ohm - 26G + (32G * 38G) + Ribbon
• Staggered Staple - 0.2ohm - 28G + 32G + Ribbon
• Mesh Wire - 316L 300 Mesh

This product is for advanced users only. It consists of risk of damaging your mods, devices, and batteries if it is being used improperly. Please make sure that you have great understanding and have done researches on this product before purchasing.

Note: When it comes to using RDA, RTA, and RDTA, we strongly recommended to wash and clean all the atomizers thoroughly and carefully. Likewise, please have a great sense of knowledge when it comes to handling and using these products.

We always strongly recommend testing the coils with ohm-meter before using them with your mods, devices and batteries. Coils with low resistance are not suitable with all mods, devices and batteries. Please make sure that your mods, devices and batteries can handle low resistance before using them.

Note: There is always an inherent risk when using any rechargeable batteries at anytime and under any circumstances. ElementVape.com and any of ElementVape.com’s parent and subsidiary companies are not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making.

ElementVape.com and any or all of ElementVape.com’s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly.

When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries at the clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in controlled environment.