The Maze V3 RDA by HCigar is the modern evolution of the original Maze RDA, implementing a unique Vortex Inlet design for adjustable directional airflow to pair with a flavor-orientated two-post, single coil build deck. The Maze V3 RDA measures 22mm in diameter and 26mm in height, fully compact to enhance the flavor recreation of the atomizer chamber. The dripper is constructed with superior 316 Stainless Steel with CNC engravings for a polished showcase piece. The implementation of a Vortex Inlet design allows for various airflow style to enter the system. The adjustment of this mechanism can be done via a flathead screwdriver, turning the internal airtubes from dual 2mm airslots to four 3mm airslots. The internal chamber houses a two-post, single terminal per post design, catering to single coil configurations. Coil leads are top-secured via hexagon screws, providing user-friendly mechanism while maximizing conductivity. Finishing off the Maze RDA V3 are two drip tips styles, a 10mm wide ULTEM drip tip and a 7mm wide Stainless Steel drip tip, and a bottom-feeding 510 pin for squonk-ready set-up.
HCigar Maze V3 RDA Features:
- 22mm Diameter
- 26mm Height - Including Drip Tip
- 5.5mm Deep Juice Well
- Superior 316L Stainless Steel Construction
- Two-Post, Single Terminal Build Deck - Flavor Design
- PEEK-Insulated Positive Post
- Deckmilled Negative
- Single Coil Configuration
- Unique Vortex Inlet Airflow Design - Fully Adjustable
- Top Airflow Design - Multiple Airslots
- 10mm Wide ULTEM Drip Tip
- 7mm Wide Stainless Steel Drip Tip
- Squonk-Ready Bottom-Feeding 510 Pin
- CNC Engravings
- Gold-Plated Brass 510 Connection
- 1 Maze V3 RDA
- 1 Extra Drip Tip
- 1 Allen Key
- 1 Squonk-Ready 510 Pin
- 1 Organic Cotton Pad
- 1 Set of Prebuilt Clapton Coils
- Spare Parts & O-Rings
This product is for advanced users only. It consists of risk of damaging your mods, devices, and batteries if it is being used improperly. Please make sure that you have great understanding and have done researches on this product before purchasing.
Note: When it comes to using RDA, RTA, and RDTA, we strongly recommended to wash and clean all the atomizers thoroughly and carefully. Likewise, please have a great sense of knowledge when it comes to handling and using these products.
We always strongly recommend testing the coils with ohm-meter before using them with your mods, devices and batteries. Coils with low resistance are not suitable with all mods, devices and batteries. Please make sure that your mods, devices and batteries can handle low resistance before using them.
Note: There is always an inherent risk when using any rechargeable batteries at anytime and under any circumstances. ElementVape.com and any of ElementVape.com’s parent and subsidiary companies are not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making.
ElementVape.com and any or all of ElementVape.com’s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly.
When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries at the clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in controlled environment.
|Color||Silver / SS, Black, Blue, Red, Purple|