Mage 24mm RTA by CoilART - Two-Post

The Mage 24mm RTA by CoilArt is a highly capable rebuildable platform, featuring 3.5mL juice reservoir, convenient threaded top-fill system, two-post dual terminals build deck, and a concise form factor. Despite its short stature, the Mage RTA measures 24mm in diameter to increase the effective build deck while offering 3.5mL juice capacity. The convenient top-fill system is enabled through a threaded sloped Delrin top cap to expose the massive dual fill ports. The 15.2mm build deck integrates a two-post dual terminals design, with each terminal measuring 2mm each to accommodate a plethora of build configurations and wire sizes. The addition of freely rotating design implementation to the build deck makes assembly and disassembly more dynamic than the standard platforms. Airflow enters the coil chamber through the exterior quad 9mm by 1mm airslots and feeding into the interior dual 4mm diameter airflow tubes, allowing for massive throttle of vapor production. A tried and true platform with well-rounded functionality, the Coil Art Mage 24mm RTA is a highly effective rebuildable tank atomizer.

Mage 24mm RTA by CoilART Features:

• 24mm Diameter
• 3.5mL Juice Reservoir
• Superior Stainless Steel Construction
• Glass Reinforcement
• 15.2mm Build Deck
• Freely Rotating Deck
• Two-Post, Dual Terminal Design
• 2mm Diameter Terminals
• PEEK Insulator
• Single or Dual Configurations
• Adjustable Quad Exterior Airflow
• Dual Internal Air Tubes Inside Chamber
• Convenient Threaded Top-Fill Method
• Sloped Delrin Widebore Drip Tip
• 24K Gold-Plated 510 Contact Pin

Includes:

• 1 Mage RTA
• 1 Replacement Glass Tube
• 1 Accessories Bag

This product is for advanced users only. It consists of risk of damaging your mods, devices, and batteries if it is being used improperly. Please make sure that you have great understanding and have done researches on this product before purchasing.

Note: When it comes to using RDA, RDTA, and RDTA, we strongly recommended to wash and clean all the atomizers thoroughly and carefully. Likewise, please have a great sense of knowledge when it comes to handling and using these products.

We always strongly recommend testing the coils with ohm-meter before using them with your mods, devices and batteries. Coils with low resistance are not suitable with all mods, devices and batteries. Please make sure that your mods, devices and batteries can handle low resistance before using them.

Note: There is always an inherent risk when using any rechargeable batteries at anytime and under any circumstances. ElementVape.com and any of ElementVape.com’s parent and subsidiary companies are not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making.

ElementVape.com and any or all of ElementVape.com’s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly.

When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries at the clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in controlled environment.