Cigreen Lycan RDA is constructed from stainless steel and consists of two top cap options. First top cap option allows is interchangeable that comes with the airflow fins, and comes with 2 delrin adapters. The first delrin adapter consists of wide bore delrin drip tip, which to reduce the chamber and give the ability to control the flavor productions. The second delrin adapter offers the same ability; however, it lets you use 510 drip tips of your choice. As for the second top cap, it is a competition cap that consist of heat fins
For spit-back protection, the Lycan RDA features the stainless steel honeycomb screen to prevent eliquids from spitting back. There are two bottom airflow holes at the base, which measured at 8mm.
The build deck features T style center posts that allows single, dual or even quad coil builds. The negative posts are milled to the deck and juice well is very deep.
Extra accessories come with the package include Copper T style posts, 510 copper and spare parts kit.
Cigreen Lycan RDA Features:
- 22mm diameter
- Stainless Steel construction
- Adjustable side airflow
- Adjustable direct to coil airflow
- Stainless steel spit-back protection
- Square peek insulator
- T style posts
- Square posts
- Huge post holes for low gauge wires
- Negative posts milled to deck
- Deep juice well (6mm)
- Comes with ultra-wide bore drip tip AND standard 510 delrin adapter.
This product is for advanced users only. It consists of risk of damaging your mods, devices, and batteries if it is being used improperly. Please make sure that you have great understanding and have done researches on this product before purchasing.
Note: When it comes to using RDA, RDTA, and RDTA, we strongly recommended to wash and clean all the atomizers thoroughly and carefully. Likewise, please have a great sense of knowledge when it comes to handling and using these products.
We always strongly recommend testing the coils with ohm-meter before using them with your mods, devices and batteries. Coils with low resistance are not suitable with all mods, devices and batteries. Please make sure that your mods, devices and batteries can handle low resistance before using them.
Note: There is always an inherent risk when using any rechargeable batteries at anytime and under any circumstances. ElementVape.com and any of ElementVape.com’s parent and subsidiary companies are not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making.
ElementVape.com and any or all of ElementVape.com’s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly.
When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries at the clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in controlled environment.