LVE Orion 2 40W Pod System

Shop the LVE Orion 2 Pod System, featuring a 1500mAh battery, 5-40W output range, and is uses interchangeable decorative panels for self expression. Constructed from durable zinc-alloy, the chassis of the Orion 2 is slightly bigger than its predecessor, adopting a luxurious and quality build design. Equipped with an integrated 1500mAh LiPo battery, the Orion 2 Pod System can deliver plenty of power, easily lasting through the 4.5mL refillable pod capacity. Outfitted with a adjustable airflow control ring, the Orion 2 Pod Mod Kit is an appropriate successor to the Orion dynasty.

LVE Orion 2 40W Pod System Features:
• Dimensions: 103mm by 43mm by 17.2mm
• Battery Capacity: Built-In 1500mAh LiPo
• Wattage Range: 5-40W
• Resistance Range: 0.15-3.0ohm
• Chassis Material: Zinc-Alloy
• Charging: Type-C Port
• Operation: Button-Activated
• Pod Series: Orion 2 Pods
• Fill System: Threaded Top Fill
• Pod Material: PCTG
• Pod Capacity: 4.5mL
• Pod Connection: Pod Release Switch (Snap-In)
• Coil Installation: Press Fit
• Coil Support: Orion 2 Coils
• Adjustable Airflow Ring
• Magnetic Decorative Panels
• Display Screen 0.69" OLED Screen
• Auto Shut-Off Protection
• PCBA Overheat Protection
• No-Atomizer Protection
• Short-Circuit Protection
• Low Voltage Protection
• Over Discharge Protection
• Over Charge Protection
• USB Input Protection
 
Includes:
• 1 Orion 2 Device
• 1 Orion 2 Pods
• 1 0.4ohm Mesh Coils
• 1 Type-C Cable
• 1 User Manual
• 1 Suction Cup

Includes - Limited RBA Edition:
• 1 Orion 2 Device
• 1 Orion 2 RBA
• 1 Premade Coil Tank
• 1 RBA Tank
• 1 0.4ohm Coils
• 1 0.8ohm Coils
• 1 Accessories Pack
• 1 Orion 2 User Manual
• 1 Orion RBA Manual

Make sure to properly prime each coils and pods before use.

Warning: If the coils has a sub-ohm resistance, please make sure you have a great understanding and technical knowledge on how to use mods and batteries that can handle Sub-Ohm coils. Do not use short or flat 510 connection on any hybrid or hybrid style device. If you are not familiar or unsure of particular products or set-ups, please do not use it. Always use proper precautions and handling.

Note: There is always an inherent risk when using any rechargeable batteries at anytime and under any circumstances. ElementVape.com and any of ElementVape.com’s parent and subsidiary companies are not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making.

ElementVape.com and any or all of ElementVape.com’s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly.

When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries at the clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in controlled environment.