The Lost Vape Triade DNA250C 300W Box Mod is the ultimate representation of Evolv's latest DNA250C chipset, presenting a modern and futuristic rendition of the triple 18650 structural architecture with attention-to-details in designs and craftsmanship. The chassis of the Triade DNA250 implements similar aesthetics from its predecessor, featuring a genuine leather battery cover on a slim poly-angular body that rests comfortably in the palm of the user. Precision milled Stainless Steel buttons retain the highly responsive and smooth feel, while adding ventilation stripes for a perfect statement piece. The Triade DNA250 integrates Evolv's most powerful DNA 250 Color Chipset, featuring a series of innovative functionality - Wattage Control, Temperature Protection, Replay Function, Boost Mod, Preheat, and Onboard Programmable Multicolor LED. Powered by triple 18650 batteries (sold separately), the Triade DNA250C can fire up to a staggering 300W of maximum output. Fully upgraded in performance while retaining the pinnacle of designs in reconfigurable devices, the Lost Vape Triade DNA250C is the ultimate flagship output technology.
Lost Vape Triade DNA250C 300W TC Box Mod Features:
- Dimensions - 85mm by 50mm by 40mm
- Triple High-Amp 18650 Battery Platform - Not Included
- Patented Evolv DNA250C Color Board
- Wattage Output Range: 1-300W
- Temperature Range: 200-600F
- Min Kanthal Resistance: 0.1ohm
- Min Temperature Resistance: 0.08ohm
- Preheat Functionality
- Replay Functionality - Temp-Sensing & Tuning of Temperature Control
- Watt Boost Mode - Increase Initial Power Ouput and Ramp-Up Time
- Intuitive 0.9" Full-Color TFT Display
- Highly Responsive Three Adjustment
- Reverse Protection System
- Upgradeable Escribe Software
- 98% Output Efficiency
- Cell-by-Cell Monitoring
- Cell Balancer
- Atomizer Protection
- Low Resistance Protection
- Short Circuit Protection
- Overheat Protection
- Low Voltage Step Down Protection
- Onboard Reverse Polarity Protection
- Micro-USB Port - 2A Balance Charging Capability
- Stainless Steel 510 Thread Point
- Spring-Loaded Nickel Plated Brass 510 Connection
- 1 Triade DNA250C Mod
- 1 MicroUSB Cable
- Instructional Manual
Please have a great understanding and technical knowledge on how to use this product in order to properly use it.
Note: For 18650/20700/21700 battery mods, batteries must be matched and married in terms of brand, model, and battery state at all times. Discharge and recharge batteries within the same grouping of two, three, and etc. Failure to do so may result in injury. Never use damaged or improperly wrapped batteries with this device.
We highly recommend using an external battery charger for 18650 battery mods, as it helps with balanced charging and prolongs the life of the battery and mod, such as from worn out microUSB port.
In order to use temperature control feature, it requires use of nickel, titanium, or stainless steel coils.
Note: There is always an inherent risk when using any rechargeable batteries at any time and under any circumstances. ElementVape.com and any of ElementVape.com’s parent and subsidiary companies are not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making.
ElementVape.com and any or all of ElementVape.com’s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly.
When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries at the clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in a controlled environment
Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Please dispose of battery cells, chargers or any other electronic devices in accordance with local laws and mandates.