Lost Vape HYPERION DNA 100C Box Mod

Check out Lost Vape HYPERION DNA 100C Box Mod, featuring a single high-amp battery, 1-100W output range, and is IP68 rated against shock, water, and dust. Encapsulated within the zinc-alloy chassis, is the Evolv DNA 100C Chipset, allowing for up to 100W of output and temperature control options that are compatible with nickel, titanium, and stainless steel wires. Crafted in a IP68 rated manner, the HYPERION Box Mod is impervious to intrusion from dust and water, while mitigating damage to the internal parts from drops or falls. Utilizing any single 18650, 20700, or 21700 battery, the battery is installed at the bottom behind a threaded battery cap.

Lost Vape HYPERION DNA 100C Box Mod Features:
Evolv DNA 100C Chipset
Dimensions - 95mm by 44.5mm by 34.5mm
Single High-Amp 18650 / 20700 / 21700 Battery - Not Included
Wattage Output Range: 1-100W
Voltage Output Range: 0.2-9.0V
Resistance Range: 0.1-3.0ohm
Temperature Range: 200°-600°F
Nickel, Titanium, and Stainless Steel Wire Compatibility
Boost Mode
Replay Mode
IP68 Waterproofing
Zinc-Alloy Chassis Construction
Intuitive Firing Button
0.9" OLED Display Screen
Two Adjustment Buttons
Atomizer Protection
Low Resistance Protection
Short-Circuit Protection
Overheat Protection
Low Voltage Step Down Protection
Reverse Polarity Protection\
Type-C USB Port
Threaded 510 Connection
Available in Red Splatter, Blue Splatter, Green Splatter, Gunmetal Calf Leather, Black Calf Leather, Black Carbon Fiber, Gunmetal Carbon Fiber

Includes:
1 HYPERION DNA 100C Box Mod
1 HYPERION DNA 100C Badge
1 Type-C Connecting Cable
1 18650 Battery Adaptor
1 User Manual

Please have a great understanding and technical knowledge on how to use this product in order to properly use it.

We highly recommend using an external battery charger for 18650 battery mods, as it helps with balanced charging and prolongs the life of the battery and mod, such as from worn out microUSB port. Never use damaged or improperly wrapped batteries with this device. We recommend all 18650/20700/21700 battery mods to use matching batteries with similar brand, model, and battery state at all times.

In order to use temperature control feature, it requires use of nickel, titanium, or stainless steel coils.

Note: There is always an inherent risk when using any rechargeable batteries at any time and under any circumstances. ElementVape.com and any of ElementVape.com’s parent and subsidiary companies are not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making.

ElementVape.com and any or all of ElementVape.com’s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly.

When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries at the clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in a controlled environment

Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Please dispose of battery cells, chargers or any other electronic devices in accordance with local laws and mandates.