Skip To Content

Lost Vape Halcyon Squonker DNA200 Box Mod



Availability: Out of Stock

Product info:

The Lost Vape Halcyon Squonker DNA200 Box Mod is one of the first squonk-ready DNA200 platforms featuring 8mL juice reservoir and 900 mAh FullyMax 3 Cell LiPo within a stunning squared chassis.

*Required fields

The Lost Vape Halcyon Squonker DNA200 is a revolutionary step-forward in vaping systems, one of the first squonk-ready DNA200 platforms featuring 8mL juice reservoir, 900 mAh FullyMax 3 Cell LiPo, and an extraodinary showcase piece. A dramatic upgrade over all other squonk-ready systems is the integration of Evolv's DNA200 intelligent chipset, featuring a staggering 200W maximum output, 97% efficiency, full temperature regulation, and customizable screens and settings. The architectural structure of the Halcyon DNA 200 is engineered with modular carbon fiber inlay within a polished 6063 Aluminum T6 Frame, with an squared ergonomic chassis that splits in two components. In one of the compartments, the Halcyon Squonker DNA200 implements XT30 LiPo Connection, allows for the removal and servicing of the FullyMax 900mAh 10W 11.1V 3 Cell Lipo battery to fully utilize the DNA200 chipset (Note: removal and replacement of LiPo pack voids warranty and is ONLY intended for advanced users). The other comportment houses the refillable 8mL squonk bottle, with a rounded door cutout for convenient access and gorgeous showcase of the device. Built by the critically acclaimed Lost Vape with a full array of finely tune performance within an innovative platform, the Halcyon DNA200 Box Mod is the crowning achievement in all-day vape system.

Lost Vape Halcyan DNA 200 200W TC Box Mod Features:

  • 8mL Juice Reservoir
  • 900 mAh FullyMax 10W 11.1V 3 Cell LiPo
  • Wattage Output Range: 5~200 Watts
  • Voltage Output Range: 1~9 Volts
  • Temperature Range: 200-600F
  • Min Kanthal Resistance: 0.1ohm
  • Min Temperature Resistance: 0.08ohm
  • Patented Evolv DNA200 Chip
  • Intuitive OLED Display
  • 6063 T6 Aluminum Construction
  • Stunning Carbon Fiber Inlay
  • Sleek Squared Frame
  • Stainless Steel Rounded Buttons
  • Bottom-Feed Juice Design
  • Squeeze Juice Section for Dripping
  • Upgradeable Escribe Software
  • 97% Output Efficiency
  • Cell-by-Cell Monitoring
  • Cell Balancer
  • Atomizer Protection
  • Low Resistance Protection
  • Short Circuit Protection
  • Overheat Protection
  • Low Voltage Step Down Protection
  • XT30 Connection
  • Squonk-Ready Stainless-Steel 510 Connection
  • Note: Removal and replacement of LiPo pack voids warranty and is ONLY intended for advanced users


In order to use temperature control feature, it requires use of nickel coils or titanium coils and must be built with non-resistant wire.

Do not use Ni200, Titanium, and Stainless Steel with non-temperature control devices/mods. This is a risk of battery explosion! Please make sure that the devices/mods that you are using is capable of controlling coil temperature.

Warning: This tank is a Sub-Ohm resistance atomizer and only work on mechanical mod or devices that can handle Sub-Ohm resistance of 0.5ohm or lower. Please make sure you have a great understanding and technical knowledge on how to use mods and batteries that can handle Sub-Ohm coils. Do not use short or flat 510 connection on any hybrid or hybrid style device. If you are not familiar or unsure of particular products or set-ups, please do not use it. Always use proper precautions and handling.

Note: When it comes to using RDA, RDTA, and RDTA, we strongly recommended to wash and clean all the atomizers thoroughly and carefully. Likewise, please have a great sense of knowledge when it comes to handling and using these products.

We always strongly recommend testing the coils with ohm-meter before using them with your mods, devices and batteries. Coils with low resistance are not suitable with all mods, devices and batteries. Please make sure that your mods, devices and batteries can handle low resistance before using them.

This product is for advanced user only! Please have a great understanding and technical knowledge on how to use this product in order to properly use it. Use it at your own risk!

Note: There is always an inherent risk when using any rechargeable batteries at anytime and under any circumstances. and any of’s parent and subsidiary companies are not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making. and any or all of’s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly.

When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries at the clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in controlled environment

Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Please dispose battery cells, chargers or any other electronic devices in accordance of local laws and mandates.