The Laisimo Wyvern 235W TC Box Mod is the most powerful system from Laisimo's incredible box mod line-up, featuring 235W of maximum power with comprehensive temperature control and a chassis inspired by the Ferrari GT FXX K. The Wyvern 235W implements a modernized structural chassis, with soft contour and sharp design accents for a visually appealing showcase piece. The epicenter of the device lies a vibrant 1.3 Inch TFT OLED display with full-color screen for a highly intuitive experience and user-friendly operations with ergonomically placed adjustment buttons. Powered by Laisimo's latest chipset, the Wyvern can throttle up to a maximum output of 235W and full-temperature support for Ni200, Titanium, and Stainless heating elements. It is equipped with TCR Adjustments for a full range of performance customization. The Wyvern 235W is powered by dual high-amperage 18650 batteries (sold separately) accessed via magnetic sliding battery cover. A combination of fully integrated output technology combined with everlasting chassis designs, the Laisimo Wyvern 235W TC Box Mod is set a worthy workhorse for all users.
Laisimo Wyvern 235W TC Box Mod Features:
- Dual High-Amp 18650 Batteries - Not Included
- Wattage Output Range: 10-235W
- Voltage Output Range: 0.5-7.5V
- Min Atomizer Resistance: 0.05ohm
- Temperature Range: 200-600F
- Supports Ni200 Nickel, Titanium, and Stainless Steel Heating Elements
- Vibrant 1.3 Inch Intuitive OLED - Full Color Display
- Full Display Matrix - Rich Data Feedback
- Oversized Firing Mechanism
- Ergonomically Placed Adjustment Buttons
- Magnetized Sliding Battery Door
- Intelligent Atomizer Recognition
- Puff Monitoring System
- Over-Working Time Protection
- Short Circuit Protection
- Over-Heat Protection
- Low Battery Warning
- MicroUSB Port
- 510 Connection
- 1 Wyvern 235W TC Box Mod
- 1 MicroUSB Port
- Instructional Manual
In order to use temperature control feature, it requires use of nickel, titanium, or stainless steel coils and must be built with non-resistant wire.
This product is for advanced user only! Please have a great understanding and technical knowledge on how to use this product in order to properly use it. Use it at your own risk!
We highly recommend using an external battery charger for 18650 battery mods, as it helps with balanced charging and prolong the life of the battery and mod.
Note: There is always an inherent risk when using any rechargeable batteries at anytime and under any circumstances. ElementVape.com and any of ElementVape.com’s parent and subsidiary companies are not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making.
ElementVape.com and any or all of ElementVape.com’s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly.
When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries at the clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in controlled environment
Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Please dispose battery cells, chargers or any other electronic devices in accordance of local laws and mandates.