The Laisimo Spider 200 TC Box Mod delivers one of the most user-friendly, high-wattage device in the industry, integrating a capable chipset with 200W of maximum power and temperature control suite within a beautiful ergonomic chassis. The Spider 200W was intuitive constructed in a compact size, measuring 84mm by 41mm by 33, implementing soft curvature all-around with futuristic engravings along the chassis. The chipset is notably intelligent, equipped with output wattage range of 1 to 200W, minimum atomizer of 0.05ohms, and intuitive temperature control with support for Ni200 Nickel, Titanium, and Stainless Steel heating elements with TCR adjustment. Powered by dual high-amp 18650 batteries (sold separately), it can be accessed via magnetized battery door. The 1 Inch OLED display features full-color resolution, providing essential information at a glance with high-quality resolution.
Laisimo Spider 200W TC Box Mod Features:
- Dimensions: 84mm by 41mm by 33mm
- Dual 18650 High-Amp Battery - Not Included
- Wattage Output Range: 1-200W
- Minimum Atomizer Resistance: 0.05ohm
- Temperature Range: 200-600F
- Versatile Temperature Control Module
- Supports Ni200 Nickel, Titanium, and Stainless Steel Heating Elements
- Temperature Coefficient of Relativity (TCR) Adjustments
- Superior Zinc Alloy Construction
- Soft Curvature Chassis
- Intuitive 1 Inch OLED Display - Full-Color Rsolution
- Oversized Firing Mechanism
- Two Adjustment Buttons
- Low Resistance Protection
- Over-time Protection
- Reverse Polarity Protection
- Overheating Protection
- MicroUSB Port
- 510 Connection
- 1 Laisimo Spider 200
- 1 MicroUSB Cable
- Instructional Manual
In order to use temperature control feature, it requires use of nickel, titanium, or stainless steel coils and must be built with non-resistant wire.
This product is for advanced user only! Please have a great understanding and technical knowledge on how to use this product in order to properly use it. Use it at your own risk!
Note: There is always an inherent risk when using any rechargeable batteries at anytime and under any circumstances. ElementVape.com and any of ElementVape.com’s parent and subsidiary companies are not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making.
ElementVape.com and any or all of ElementVape.com’s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly.
When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries at the clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in controlled environment
Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Please dispose battery cells, chargers or any other electronic devices in accordance of local laws and mandates.