The KBox 200W TC Box Mod is the next performance upgrade of the KBox line-up from theacclaimed KangerTech family, specifically a power boost capable of firing up to 200W and fully improved temperature control system. The KBox 200W features integrated temperature module with minimum atomizer resistance of 0.05 to support Ni200 Nickel, Titanium, Stainless Steel, and Nichrome wires, providing fantastic versatility with a wide range of common heating elements and compatibility with today's top atomizers. The latest Kanger chip-set with temperature atomizer sensor technology can detect at an astounding rate of 1000 times per second, furthering consistent and accurate temperature regulation. Under normal usage, the KBox 200W is capable of executing a multiple of tasks, adjusting to variable output banding on wattage, voltage, and current battery capacity with 360kHz high speed synchronous DC-DC control mode. This results in full synergies across design, extending the life of batteries and coil builds for extended vape use throughout the day. Constructed out of superior Zinc Alloy in a classic svelte chassis combined with incredible operational versatility, the Kanger KBox 200W is the power standard for comprehensive output technology.
Kanger KBox 120W Features:
- 18650 High Amp Rechargeable Dual Battery - Sold Separately
- Wattage Output Range: 7~120W
- Min Atomizer Resistance: 0.05ohm
- Superior Zinc Alloy Construction
- Intuitive OLED Display
- Latest Kanger Chipset Technology
- Versatile Temperature Control Functionality
- Nickel, Titanium, Stainless Steel, and Nichrome Compatible
- Magnetic Battery Cover
- Short Circuit Protection
- Overheat Protection
- Low Voltage Protection
- Discharge Protection
- Upgradeable Software
- MicroUSB Port - Firmware Upgrades
- Spring-Loaded 510 Connection
In order to use temperature control feature, it requires use of nickel coils or titanium coils and must be built with non-resistant wire.
This product is for advanced user only! Please have a great understanding and technical knowledge on how to use this product in order to properly use it. Use it at your own risk!
Note: There is always an inherent risk when using any rechargeable batteries at anytime and under any circumstances. ElementVape.com and any of ElementVape.com’s parent and subsidiary companies are not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making.
ElementVape.com and any or all of ElementVape.com’s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly.
When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries at the clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in controlled environment
Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Please dispose battery cells, chargers or any other electronic devices in accordance of local laws and mandates.
|Color||Black, Red, White|