Kanger iKEN 230W TC Starter Kit

KangerTech has reentered the modern, high-powered systems segment with the introduction of the iKEN 230W TC Starter Kit, delivering a 5100mAh internal battery with full-range of functionality to pair with the top-filling, top-airflow iKEN Sub-Ohm Tank. The iKEN 230W TC Box Mod is constructed with a soft curvature along the chassis, with carbon fiber inlay around the grip area for a stunning impression. It is equipped with a large 1.54 Inch TFT Full-Color display screen for a full array of essential data and intuitive setting adjustments. Powered by a staggering 5100mAh internal battery, the iKEN has a maximum power output of 230W, temperature control suite with TCR adjustment, and three different power modes: Beginner, Intermediate, and Expert. The included iKEN Sub-Ohm Tank is the latest creation from Kanger, featuring a top-filling, top airflow design with utilization of the popular SSOCC atomizer system. The top airflow structure is quite dynamic, with air channeling entering the two dual airslots and redirects down to the atomizer core and back up through the central chimney to create a "U" airflow pathway. Setting the benchmark for achievement in long-lasting performance system within a beautiful hardware set-up, the Kanger iKEN 230W TC Starter Kit is one of the most featured packed devices at any price point.

Kanger iKEN 230W TC Box Mod Features:

• Integrated 5100mAh Internal Battery 
• Maximum Wattage Output: 230W
• Min Atomizer Resistance: 0.1 ohm
• Temperature Control Range: 300-600F
• Supports Ni200, Titanium, and Stainless Steel Heating Elements
• TCR Adjustments
• Three Modes: Beginner, Intermediate, Expert
• Superior Zinc Alloy Construction
• Carbon Fiber Grip Inlay
• Intuitive 1.54 Inch TFT Screen - Full-Color Display
• Low Voltage Protection
• Short Circuit Protection
• Over Discharge Protection
• Overheat Protection
• MicroUSB Charging Port 
• Stainless Steel 510 Contact

Kanger iKEN Sub-Ohm Tank Features:

• High-Quality Stainless Steel Construction
• Pyrex Glass Reinforcement
• Kanger SSOCC Coil System
• Convenient Threaded Top-Fill Method
• Dual Top Airflow Control
• "U" Shape Airflow Pathway
• Leak-Proof Design
• POM Delrin Widebore Drip Tip
• 510 Connection

In order to use temperature control feature, it requires use of nickel, titanium, or stainless steel coils and must be built with non-resistant wire.

This product is for advanced user only! Please have a great understanding and technical knowledge on how to use this product in order to properly use it. Use it at your own risk!

Note: There is always an inherent risk when using any rechargeable batteries at anytime and under any circumstances. ElementVape.com and any of ElementVape.com’s parent and subsidiary companies are not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making.

ElementVape.com and any or all of ElementVape.com’s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly.

When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries at the clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in controlled environment

Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Please dispose battery cells, chargers or any other electronic devices in accordance of local laws and mandates.