The Kanger EVOD Pro MTL Starter Kit continues the storied heritage from one of the most acclaimed manufacturers, providing a Mouth-To-Lung orientated platform, featuring optimal flavor recreation, single 18650 powered output, 4mL juice reservoir, and Kanger's bottom-feeding CLOCC System. The EVOD Pro Kit implements a streamlined architectural structure, fully integrating the tank and battery into a single unified unit. The 22mm device is a special plug-and-play platform in the market, powered by a single 18650 battery (sold separately) that is bottom-loaded through a threaded battery cap. It can be charged via MicroUSB port located on the side of the chassis with 1A maximum charge rate, and allows for switching of batteries for immediate on-the-go functionality. The single button-operation can fire up to an output of 4.2V DC during optimal battery state, and built with a plethora of safely features. The integrated tank makes for a great accompanying piece, holding up to 4mL coupled with a convenient threaded top-fill system alongside Kanger's CLOCC System. Airflow features dual 2mm airslots, synergizing with the coil system for a flavor-focused experience and catering to Mouth-to-Lung (MTL) styled vaping. With a streamlined chassis combined with a flavor-based system and a highly competitive price point, the Kanger EVOD Pro MTL Starter Kit is a simple platform for flavor chasers and enthusiasts.
Check out the CLOCC Replacement Coils here.
Kanger EVOD Pro Battery Features:
- 22mm Diameter
- Single 18650 Operation - Sold Separately
- Output Voltage: 4.2V DC
- Minimum Coil Resistance: 0.15ohm
- Single Button Operation
- MicroUSB Charging Port - 1A Maximum Rate
- Bottom-Loaded Battery Cap
- Short-Circuit Protection
- Over Discharge Protection
- Low Battery Indication
EVOD PRO Tank Features:
- 4mL Juice Capacity
- Glass Window Reinforcement
- Mouth-To-Lung (MTL) Orientated
- Flavor-Focused Design
- CLOCC System - Bottom-Feeding
- Convenient Threaded Top-Fill Design
- Dual Top Airholes
- Widebore Delrin Drip Tip
- Note: EVOD Pro Tank is not compatible with CLOCC Ni200 Coils.
- 1 Kanger EVOD Pro Device
- 1 MicroUSB Cable
- Instruction Manual
In order to use temperature control feature, it requires use of nickel coils or titanium coils and must be built with non-resistant wire.
Do not use Ni200, Titanium, and Stainless Steel with non-temperature control devices/mods. This is a risk of battery explosion! Please make sure that the devices/mods that you are using is capable of controlling coil temperature.
Warning: This tank is a Sub-Ohm resistance atomizer and only work on mechanical mod or devices that can handle Sub-Ohm resistance of 0.5ohm or lower. Please make sure you have a great understanding and technical knowledge on how to use mods and batteries that can handle Sub-Ohm coils. Do not use short or flat 510 connection on any hybrid or hybrid style device. If you are not familiar or unsure of particular products or set-ups, please do not use it. Always use proper precautions and handling.
Note: When it comes to using RDA, RDTA, and RDTA, we strongly recommended to wash and clean all the atomizers thoroughly and carefully. Likewise, please have a great sense of knowledge when it comes to handling and using these products.
We always strongly recommend testing the coils with ohm-meter before using them with your mods, devices and batteries. Coils with low resistance are not suitable with all mods, devices and batteries. Please make sure that your mods, devices and batteries can handle low resistance before using them.
This product is for advanced user only! Please have a great understanding and technical knowledge on how to use this product in order to properly use it. Use it at your own risk!
Note: There is always an inherent risk when using any rechargeable batteries at anytime and under any circumstances. ElementVape.com and any of ElementVape.com’s parent and subsidiary companies are not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making.
ElementVape.com and any or all of ElementVape.com’s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly.
When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries at the clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in controlled environment
Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Please dispose battery cells, chargers or any other electronic devices in accordance of local laws and mandates.