The Kanger CUPTI 75W TC All-In-One Kit is a compact fully inclusive kit available on the market by one of the highly regarded manufacturer in the industry, measuring a trim 50mm by 22.5mm by 82mm in size and featuring 5mL juice reservoir, Kanger CLOCC system, maximum wattage of 75W, and effective temperature control system. The Kanger CUPTI implements a highly efficient structural architecture, achieved with clearly design chassis with the 5mL tank portion integrating into the device. Alongside the leak-proof bottom-fed coil attachment method, and top airflow assembly to feeds down directly into the core, it is practically leak-proof. The CUPTI effectively drives the included CLOCC Sub-Ohm tank, which features the 0.5ohm CLOCC SS316L Coil rated for 16 to 60W and a Mouth-to-Lung focused 1.5ohm CLOCC NiCR Coil rated for 10 to 26W. The CUPTI chipset is notably intelligent, capable of firing up to 75W alongside a comprehensive temperature control suite that supports, Ni200 Nickel, Titanium, Stainless Steel, and Nichrome heating elements. It is powered by a single high amperage 18650 battery (sold separately), with a hinge locking bottom-loaded battery door. Informational readouts is user-friendly, with a top OLED display intuitively controlled by the two-adjustment buttons located right next to it. The ultimate in highly functional compact kits, the Kanger CUPTI 75W TC Starter Kit is the essential well-rounded vape system for all types of users.
Check out the CLOCC Replacement Coils here.
Kanger CUPTI 75W TC All-In-One Starter Kit Features:
- All-In-One TFTA-Tank Technology
- 5mL Juice Reservoir
- Single High Amperage 18650 Battery - Not Included
- Zinc Alloy and Aluminum Alloy Construction
- Pyrex Glass Reinforcement
- Wattage Output Range: 7~80W
- Minimum Atomizer Resistance: 0.15ohm
- Temperature Control Range: 200-600F
- Ni200, Titanium, Stainless Steel, and Nichrome Compatibility
- Kanger CLOCC Core System
- 0.5ohm CLOCC SS316L Coil - Direct-to-Lung
- 1.5ohm CLOCC NiCr Coil - Mouth-to-Lung
- Convenient Top-Fill Method
- Adjustable Top Airflow Design
- Optional 510 Threaded Atomizer Adapter
- Intuitive Top Positioned OLED Display
- Two Adjustment Buttons
- Ergonomically Placed Firing Mechanism
- Hinged Bottom-Loaded Battery Door
- 1A MicroUSB Port
- Short-Circuit Protection
- Open-Circuit Protection
- Reverse Battery Protection
- 1 Kanger CUPTI System
- 1 0.5ohm CLOCC SS316L Coil Head
- 1 1.5ohm CLOCC NiCr Coil Head
- 1 Delrin Widebore Drip Tip
- 1 MicroUSB Cable
- Instructional Manual
In order to use temperature control feature, it requires use of nickel coils or titanium coils and must be built with non-resistant wire.
Do not use Ni200, Titanium, and Stainless Steel with non-temperature control devices/mods. This is a risk of battery explosion! Please make sure that the devices/mods that you are using is capable of controlling coil temperature.
Warning: This tank is a Sub-Ohm resistance atomizer and only work on mechanical mod or devices that can handle Sub-Ohm resistance of 0.5ohm or lower. Please make sure you have a great understanding and technical knowledge on how to use mods and batteries that can handle Sub-Ohm coils. Do not use short or flat 510 connection on any hybrid or hybrid style device. If you are not familiar or unsure of particular products or set-ups, please do not use it. Always use proper precautions and handling.
Note: When it comes to using RDA, RDTA, and RDTA, we strongly recommended to wash and clean all the atomizers thoroughly and carefully. Likewise, please have a great sense of knowledge when it comes to handling and using these products.
We always strongly recommend testing the coils with ohm-meter before using them with your mods, devices and batteries. Coils with low resistance are not suitable with all mods, devices and batteries. Please make sure that your mods, devices and batteries can handle low resistance before using them.
This product is for advanced user only! Please have a great understanding and technical knowledge on how to use this product in order to properly use it. Use it at your own risk!
Note: There is always an inherent risk when using any rechargeable batteries at anytime and under any circumstances. ElementVape.com and any of ElementVape.com’s parent and subsidiary companies are not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making.
ElementVape.com and any or all of ElementVape.com’s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly.
When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries at the clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in controlled environment
Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Please dispose battery cells, chargers or any other electronic devices in accordance of local laws and mandates.