Kanger AKD K-Pin 2000mAh Starter Kit

The Kanger AKD K-Pin Starter Kit is the next product line-up from the innovative AKD Series, delivering a highly advanced subcompact pen-style system with an integrated 2000mAh battery and a Sub-Ohm Tank that utilizes the popular SSOCC coil structure. The K-Pin measures 24mm in diameter for both the battery and Sub-Ohm Tank, deploying futuristic design elements for a truly appealing showcase piece. Designed for on-the-go and portability, the K-Pin features a single button operation and a maximum capacity of 2000mAh with a direct voltage based output system, in which output power correlates to the current state of battery while implementing multitudes of safety protection. The included Sub-Ohm Tank with each set features a maximum capacity of 4 milliliters and quad bottom airflow control. It utilizes the wildly acclaimed SSOCC coil structure, with the introduction of a new 0.2ohm SSOCC Stainless Steel. Bringing the heralded performance of Kanger's technological prowess in a well-balanced system, the Kanger AKD K-Pin Starter Kit is one of the leading portable platform in the industry.

Kanger AKD K-Pin Battery Features:

• 24mm Diameter
• Integrated 2000mAh Battery
• Output Voltage Range: 3.2-4.2V
• Minimum Atomizer Resistance: 0.15ohm
• Single Button Operation
• LED Battery Light Indicator
• Rounded Ergonomic Contour
• Futuristic Design Elements
• Short Circuit Protection
• Over Charge Protection
• Over Discharge Protection
• High Temperature Protection
• Over Use Protection
• Charge via MicroUSB Port - Passthrough Capability
• 510 Thread Connection

Kanger AKD K-Pin Sub-Ohm Tank Features:

• 4mL Juice Well
• 24mm Tank Diamenter
• Superior Stainless Steel Construction
• Pyrex Glass Reinforcement
• Delrin Widebore Drip Tip - Twist-Off Mechanism
• Convenient Top-Fill Method
• Adjustable Quad Bottom Airflow
• Kanger's SSOCC Atomizer Structure
• 0.2ohm SSOCC Stainless Steel

Includes:
1 K-Pin System

• 2 0.2ohm SSOCC SS
• 1 MicroUSB Cable
• Instructional Manual

In order to use temperature control feature, it requires use of nickel, titanium, or stainless steel coils and must be built with non-resistant wire.

This product is for advanced user only! Please have a great understanding and technical knowledge on how to use this product in order to properly use it. Use it at your own risk!

Note: There is always an inherent risk when using any rechargeable batteries at anytime and under any circumstances. ElementVape.com and any of ElementVape.com’s parent and subsidiary companies are not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making.

ElementVape.com and any or all of ElementVape.com’s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly.

When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries at the clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in controlled environment

Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Please dispose battery cells, chargers or any other electronic devices in accordance of local laws and mandates.