The KAEES ALEXANDER 24mm BF RDA is a combination of advanced rebuildable atomizer features, incorporating a postless build deck, precision airflow control, and is equipped with a 6mm deep juice well that can be supplemented with the bottom fed squonk pin for an great vape that can conquer all. The KAEES Alexander RDA comes with a postless build deck in the shape of a lotus leaf, drawing inspiration from nature, lending 4 terminal openings at the base of the elevated build deck, side secured via hex screws. This allows for a single or dual coil installation, depending on the preference of the user or builder. In addition, the airflow inlet is located on the side of the mid cap, featuring four 5mm by 1.5mm airflow inlets, arranged in a square stacked pattern. These airflow inlets can be fully closed or opened to find an appropriate airflow preference. This allows airflow to enter and is then throttled through a second set of honeycomb style airflows that vent directly to the coil structures below in a top and side fashion. Equipped with a 6mm deep juice well, the Alexander RDA can go quite some time without dripping but can be connected to a squonker box mod to increase the length between refills and making dripping easy through the bottom fed squonking line.
KAEES ALEXANDER 24mm BF RDA Features:
- 24mm Diameter
- 6mm Deep Juice Wells
- Superior 304 Stainless Steel Construction
- Lotus Leaf-Shaped Postless Build Deck
- Side Secured via Hex Screws
- Replaceable Coil Design - Prebuilt Configurations
- 2 Clapton Coils -
- Single or Dual Coil Configuration
- PEEK Insulator
- Direct-To-Coils Airflow System
- Knurled Top Cap Airflow Control Ring
- Conical Top Cap - Enhanced Flavor
- 810 GOON-Style Resin Drip Tip
- BF Squonk 510 Connection
- Available in Silver, Black, Gunmetal, and Blue
- 1 Alexander 24mm BF RDA
- 2 Clapton Coils
- 1 510 BF Squonk Pin
- 1 Screwdriver
- 1 User Manual
- 1 Spare Parts
Note: When it comes to using RDA, RTA, and RDTA, we strongly recommended to wash and clean all the atomizers thoroughly and carefully. Likewise, please have a great sense of knowledge when it comes to handling and using these products.
We always strongly recommend testing the coils with ohm-meter before using them with your mods, devices and batteries. Coils with low resistance are not suitable with all mods, devices and batteries. Please make sure that your mods, devices and batteries can handle low resistance before using them.
Note: There is always an inherent risk when using any rechargeable batteries at anytime and under any circumstances. ElementVape.com and any of ElementVape.com’s parent and subsidiary companies are not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making.
ElementVape.com and any or all of ElementVape.com’s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly.
When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries at the clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in controlled environment.