Joyetech eGrip II 80W TC All-In-One System

The Joyetech eGrip II 80W TC All-In-One System is a fully featured starter kit that features an integrated juice reservoir of 3.5mL, maximum output of 80W, full temperature control suite with TCR adjustments, and a beautifully redefined chassis. The eGrip II Starter Kit features a ready to assemble system that implements a built-in 2100mAh internal battery, adopting Dual Circuit Protection to improve overall battery protection of over-charging, over-current and over-discharging. The onboard chipset is highly intelligent, with a range of 1 to 80W with a minimum atomizer resistance of 0.05ohm, alongside a full temperature control module that supports Ni200 Nickel, Titanium, and 316 Stainless Steel heating elements with Temperature Coefficient of Resistance (TCR) adjustments. Atomizer core utilizes the BF Coil Structure (Bottom-Feeding) to leverage Joyetech's coil technology, catering to a variety of coil configurations and heating wires that supports different types of vaping methods, ranging from mouth inhale to direct lung inhale. It also adopts the new Stainless Steel NotchCoil 0.25ohm Head, inspired by the Wismec Theorem RTA, offering superior performance and flavor recreation due to its faster ramp time and wide surface area. The Joyetech eGrip 2 is highly versatile, capable of powering other tanks, RDAs, and RTAs with the optional applied atomizer adapter. A large 0.96 Inch OLED screen provides a brilliantly clear and neatly organized display, providing a variety of customization with future firmware upgrades. It is capable of displaying Real Time Clock (RTC), entertaining Game Mode, and fashionable tank lights adjustment. Airflow is provided at the base of the drip tip, and can be adjusted easily depending on preference. With a gorgeous and timeless chassis that combines a plethora of technological capability, the Joyetech eGrip II 80W TC Starter Kit exemplifies a new level of standard in all-in-one platforms.

Check out the replacement BF Coils here.

Joyetech eGrip II 80W TC All-In-One Starter Kit Features:

• All-In-One TFTA-Tank Technology
• 3.5mL Juice Reservoir
• Built-In 2100mAh Internal Battery
• Dual Circuit Protection
• Wattage Output Range: 1~80W
• Minimum Atomizer Resistance: 0.05ohm
• Temperature Control Range: 200-600F
• Ni200, Titanium, and 316 Stainless Steel Compatibility
• Temperature Coefficient of Resistance Adjustments
• Three Memory TCR Mode 
• Bypass Mode
• 0.25ohm Stainless Steel NotchCoil DL Head (Direct Lung)
• Joyetech BF Coil Structure (Bottom-Feed) 
• 0.5ohm BF SS 316L rated for 15~30W [Lung Inhale] 
• 1.0ohm BF SS 316L rated for 10~25W [Mouth Inhale] 
• 1.5ohm BF Clapton rated for 8~20W [Mouth Inhale] 
• 0.2ohm BF-Ni rated for 500-550F 
• 0.4ohm BF-Ti rated for 450-500F
• Convenient Top-Fill Method
• Adjustable Top Airflow Design
• Optional 510 Threaded Atomizer Adapter
• Intuitive 0.96 Inch OLED Display
• Real Time Clock (RTC) Display
• Entertainment Game Mode
• Customizable LED Tank Lights
• MicroUSB Port - Firmware Upgrades
• Over Charge Protection
• Over Current protection
• Over Discharge Protection

Includes:

• 1 eGrip II All-In-One Kit
• 1 0.25ohm NotchCoil Atomizer Head
• 1 0.5ohm BS SS 316L Atomizer Head
• 1 1.5ohm BF Clapton Atomizer Head
• 1 BF RBA Head
• 1 Drip Tip
• 1 Atomizer Adapter
• 1 MicroUSB Cable
• Instruction Manual

In order to use temperature control feature, it requires use of nickel coils or titanium coils and must be built with non-resistant wire.

Do not use Ni200, Titanium, and Stainless Steel with non-temperature control devices/mods. This is a risk of battery explosion! Please make sure that the devices/mods that you are using is capable of controlling coil temperature.

Warning: This tank is a Sub-Ohm resistance atomizer and only work on mechanical mod or devices that can handle Sub-Ohm resistance of 0.5ohm or lower. Please make sure you have a great understanding and technical knowledge on how to use mods and batteries that can handle Sub-Ohm coils. Do not use short or flat 510 connection on any hybrid or hybrid style device. If you are not familiar or unsure of particular products or set-ups, please do not use it. Always use proper precautions and handling.

Note: When it comes to using RDA, RDTA, and RDTA, we strongly recommended to wash and clean all the atomizers thoroughly and carefully. Likewise, please have a great sense of knowledge when it comes to handling and using these products.

We always strongly recommend testing the coils with ohm-meter before using them with your mods, devices and batteries. Coils with low resistance are not suitable with all mods, devices and batteries. Please make sure that your mods, devices and batteries can handle low resistance before using them.

This product is for advanced user only! Please have a great understanding and technical knowledge on how to use this product in order to properly use it. Use it at your own risk!

Note: There is always an inherent risk when using any rechargeable batteries at anytime and under any circumstances. ElementVape.com and any of ElementVape.com’s parent and subsidiary companies are not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making.

ElementVape.com and any or all of ElementVape.com’s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly.

When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries at the clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in controlled environment

Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Please dispose battery cells, chargers or any other electronic devices in accordance of local laws and mandates.