Introducing the IPV4s 120W Box Mod by Pioneer4you, is the new, upgraded and improved version from the previous IPV4 Box Mod.
Now IPV4s will feature 120W of power instead of 100W like before. The temperature control now has ability to accommodate both Titanium and Nickel coils. Like the IPV3 Li V2, temperature control setting has the range of 100℃ to 300℃ and 212˚F to 572˚F.
It is still powered by 2 18650 batteries for longer vaping sessions.
With its ablility to switch to Joules Mode, it can handle lower resistance. This upgraded IPV4S 120W Box Mod will enhance your vaping experience.
Authentic IPV4s 120W Box Mod by Pioneer4you Features:
- Chip: SX330-V4SN
- Dimension: 108*58*26 (mm)
- Output wattage: 10W – 120W
- Output voltage: 1V – 7V
- Output Power (Ni wire): 5J - 50J
- Output Power (Ti wire): 5J - 100J
- Input Current: 1.3A - 40.0A
- Input Voltage: 6.2V - 8.5V
- Temperature limit Centigrade: 100℃ - 300℃
- Temperature limit Fahrenheit: 212˚F - 572˚F
- Standard Atomizer resistance: 0.1ohm – 3.0ohm
- Joules Mode Atomizer Resistance: 0.05ohm - 0.30ohm
- Powered by 2 18650 batteries (not included, can be purchased separately)
- Software Upgrade/GUI operate
- USB included
- Visual operating system
- Low voltage protection
- Low resistance protection
- High Input voltage warning
- Output short circuit protection
- Reverse battery protection
- Temperature overheat protection
Package comes with:
- 1 IPV4S Box Mod
- 1 User Manual
- 1 USB Cable
- 1 Gift Box
In order to use temperature control feature, it requires use of nickel coils and must be built with non-resistant wire.
This product is for advanced user only! Please have a great understanding and technical knowledge on how to use this product in order to properly use it. Use it at your own risk!
Note: There is always an inherent risk when using any rechargeable batteries at anytime and under any circumstances. ElementVape.com and any of ElementVape.com’s parent and subsidiary companies are not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making.
When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries at the clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in controlled environment
Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Please dispose battery cells, chargers or any other electronic devices in accordance of local laws and mandates.