IPV2S 60W Watt Box Mod by Pioneer4You

Introducing the IPV2S 60W Watt Box Mod, potential to reach 70W with upgrade, is one of the high quality and excellent performance mod in the market below 100W. 

The outage wattage range for this device is 7 wattage and 60 wattage. It also has the ability to handle subohm atomizers/clearomizers resistance as low as 0.2ohm.

For protections and safety, the IPV2S 60 Watt Box Mod comes with water resistance control, button control and variety of protections. You can view the full list at features section below.

The device can be charged through the USB cable. When it is the charging stage, the red light will stay on. Once it is fully charged, the light will turn off by itself. Additionally, it uses one 18650 battery, which allows you switch it to a new one when you are on the go. 

IPV2S 60W Watt Box Mod Features:

• Dimensions: 10 * 5 * 2.2 (cm)
• SX330 V2 Module Chip
• 510 spring loaded connection
• Aluminum body
• Output wattage: 7W - 60W
• Output voltage: 3.6V - 8.5V
• Input current: 1.3A – 25A
• Input voltage: 3.2V – 4.5V
• Atomizer resistance: 0.2ohm – 3.0ohm
• OLED Screen
• Visual operating system
• Low voltage protection
• Low resistance protection
• High input voltage warning
• Output short circuit protection
• Reverse battery protection
• USB charging
• Software upgrade/GUI operate

Package comes with:

• 1x IPV2S 60W Watt Box Mod
• 1x USB Cable
• 1x User Manual
• 1x Gift box
• 2x Screws
• 1x Screw Driver

This product is for advanced user only! Please have a great understanding and technical knowledge on how to use this product in order to properly use it. Use it at your own risk!

Note: There is always an inherent risk when using any rechargeable batteries at anytime and under any circumstances. ElementVape.com and any of ElementVape.com’s parent and subsidiary companies are not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making.

When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries at the clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in controlled environment

Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Please dispose battery cells, chargers or any other electronic devices in accordance of local laws and mandates.