Innokin Ares 24mm MTL RTA - Phil Busardo & Dimitris Agrafiotis

$29.99
In stock
Only %1 left

The Innokin Ares MTL RTA is made in collaboration with Phil Busardo and Dimitris Agrafiotis, deploying a GTA structure with two-post build deck, precision adjustable airflow system, and multi-hole internal build deck airflow diffuser.

ADD ON AND SAVE

Show More

The Innokin Ares MTL RTA is made in collaboration with Phil Busardo and Dimitris Agrafiotis, deploying a GTA structure with two-post build deck, precision adjustable airflow system, and multi-hole internal build deck airflow diffuser. The Innokin Ares RTA is has a bell-shaped inner chamber designed to concentrate into a more purer and full-bodied flavor of eLiquid, while eliminating any pesky airflow turbulence within. The adjustable airflow ring located at the bottom hosts four air holes measuring from 0.5mm to 2.0mm at increments of 0.5mm, providing next level airflow precision to user preference. Redirecting from the exterior airflow lies an internal nine (9) hole airflow user, aiming directly at the coils for excellent cooling properties.

Quick Links:
Vape Wires
Rebuildable Vape Tools

Innokin Ares MTL 24mm RTA Features:

  • Collaboration with Phil Busardo and Dimitris Agrafiotis
  • 24mm Diameter
  • 4mL Max Juice Capacity
  • Superior Stainless Steel
  • Pyrex Glass Reinforcement
  • Two-Post Build Deck - Single Terminal
  • Side-Secured via Phillips Screw
  • Bell-Shaped Inner Chamber - Reduced Air Turbulence
  • Adjustable Airflow Ring - 2mm, 1.5mL, 1.0mL, and .5mL Size
  • Internal Air Diffuser - Nine (9) Holes
  • Push-To-Open Top-Fill Stem
  • 5mm Delrin MTL Drip Tip 
  • 510 Connection

Includes:

  • 1 Ares RTA
  • 1 Spare Smoked Glass Tube
  • 1 Drip Tip Set
  • 1 Hex Key
  • 1 Wire - 1M
  • 2 Prebuilt Coils
  • 1 Spare Parts Bag
  • 1 Instructional Manual

Note: When it comes to using RDA, RTA, and RDTA, we strongly recommended to wash and clean all the atomizers thoroughly and carefully. Likewise, please have a great sense of knowledge when it comes to handling and using these products.

We always strongly recommend testing the coils with ohm-meter before using them with your mods, devices and batteries. Coils with low resistance are not suitable with all mods, devices and batteries. Please make sure that your mods, devices and batteries can handle low resistance before using them.

Note: There is always an inherent risk when using any rechargeable batteries at anytime and under any circumstances. ElementVape.com and any of ElementVape.com’s parent and subsidiary companies are not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making.

ElementVape.com and any or all of ElementVape.com’s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly.

When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries at the clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in controlled environment.

Show Less

Ratings & Reviews

Other products from same brand

Shall we send you a message when we have discounts available?

Remind me later

Thank you! Please check your email inbox to confirm.

Oops! Notifications are disabled.