The iJoy RDTA Box 200W Kit is the next generation of vaping systems, integrating an ultra-versatile IMC interchangeable build deck in a rebuildable and premade coils configuration combined with a staggering 12.8mL capacity all in a modern, easy-to-use platform for a new level of experience. Designed from the ground up with an emphasis on creating a fully ergonomic rebuildable apparatus, the iJoy RDTA Box integrates a versatile chamber that implements a gold-plated build deck with interchangeable functionality. The crowning feature of the iJoy RDTA Box is the incredibly rich ecosystem of eleven interchangeable deck options that is compatible with the iJoy COMBO RDTA and Limitless RDTA - Classic Edition, unprecedented in any other platform while excelling in usability and effectiveness. Included with each iJoy RDTA Box 200W is the IMC-3 deck, built with the tried-and-true two-post, quad terminal design inspired by Velocity-style building elements. For premade sub-ohm coil option, the kit comes with a 0.15ohm IMC-Coil 3 for convenient usability, rated for 50 to 100W. Each deck features large wicking ports, allowing cottons to be properly saturated from the absolutely massive 12.8 milliliter refillable reservoir below the rebuildable structure. It features a 15mm diameter wide filling hole, along with a built-in LED light for e-juice gauging and cleaning. The iJoy RDTA Box is constructed with futuristic design elements, featuring an intuitive 0.96 Inch OLED Display and oversized firing mechanism. The structural architecture also allows for a compact, single-handed operation, powered by dual high amperage 18650 battery (sold separately). The chipset is notably intelligent, capable of firing up to 200W of output with unique Custom User Mode and temperature control suite with support for Ni200 Nickel, Titanium, and Stainless Steel heating elements. One of the most brilliantly engineered and designed platforms to date, the iJoy RDTA Box 200W Kit is the absolute perfect device for building enthusiasts.
Check out the iJoy IMC Interchangeable Decks and Coils here.
iJoy RDTA Box 200W Features:
- Dimensions: 105mm by 55mm by 28mm
- Dual High Amp 18650 Batteries - Sold Separately
- 12.8mL Tank Reservoir
- All-In-One Design
- Wattage Output Range: 5-200W
- Voltage Output Range: 1-8W
- Minimum Atomizer Resistance: 0.05ohm
- Temperature Range: 200-600F
- Supports Ni200 Nickel, Titanium, and Stainless Steel Heating Elements
- Unique Custom User Mode
- 95% Energy Conversion Rate
- Intuitive 0.96 Inch OLED Display
- Oversized Firing Mechanism
- 20.5mm Gold-Plated Build Deck
- Interchangeable Build Deck Design - 11 Options
- IMC-1 - Two-Post w/ Clamp Mechanism
- IMC-2 - Spring-Loaded Two-Post w/ Clamp
- IMC-3 - Two-Post, Quad Terminals (Side Secured)
- IMC-4 - Two-Post, Two Terminals (Top Secured)
- IMC-5 - Two-Post, Two Large Terminals (Four-Point Secure)
- IMC-6 - Split-Positive Post, Four Terminals (Top Secured)
- IMC-7 - Postless, Four Terminals (Side-Secured)
- IMC-8 - Raised Postless, Four Terminals (Side-Secured)
- IMC-9 - Raised Postless, Four Terminals (Side-Secured)
- IMC-Coil - 0.3ohm Premade Coil - rated for 40-80W
- IMC-Coil 3 - 0.15ohm Premade Coil - rated for 50-100W
- Signature 15mm Wide Fill Port - Top-Fill
- Built-In LED Light
- Dual Side Adjustable Airflow - Knurled Top Cap
- Delrin Widebore Drip Tip
- MicroUSB Port - Firmware Upgradeable
- Spring-Loaded Gold-Plated 510 Connection
- 1 iJoy RDTA Box Mod
- 1 IMC-3 Build Deck
- 1 0.15ohm IMC-Coil 3
- 1 Nylon Brush
- 1 Phillips Screwdriver
- 1 MicroUSB Cable
- 2 Prebuilt Fused Clapton Coils
- 2 Organic Cotton Pads
- Spare Parts & O-Rings
- Instructional Manual
In order to use temperature control feature, it requires use of nickel coils or titanium coils and must be built with non-resistant wire.
Do not use Ni200, Titanium, and Stainless Steel with non-temperature control devices/mods. This is a risk of battery explosion! Please make sure that the devices/mods that you are using is capable of controlling coil temperature.
Warning: This tank is a Sub-Ohm resistance atomizer and only work on mechanical mod or devices that can handle Sub-Ohm resistance of 0.5ohm or lower. Please make sure you have a great understanding and technical knowledge on how to use mods and batteries that can handle Sub-Ohm coils. Do not use short or flat 510 connection on any hybrid or hybrid style device. If you are not familiar or unsure of particular products or set-ups, please do not use it. Always use proper precautions and handling.
Note: When it comes to using RDA, RDTA, and RDTA, we strongly recommended to wash and clean all the atomizers thoroughly and carefully. Likewise, please have a great sense of knowledge when it comes to handling and using these products.
We always strongly recommend testing the coils with ohm-meter before using them with your mods, devices and batteries. Coils with low resistance are not suitable with all mods, devices and batteries. Please make sure that your mods, devices and batteries can handle low resistance before using them.
This product is for advanced user only! Please have a great understanding and technical knowledge on how to use this product in order to properly use it. Use it at your own risk!
Note: There is always an inherent risk when using any rechargeable batteries at anytime and under any circumstances. ElementVape.com and any of ElementVape.com’s parent and subsidiary companies are not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making.
ElementVape.com and any or all of ElementVape.com’s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly.
When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries at the clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in controlled environment
Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Please dispose battery cells, chargers or any other electronic devices in accordance of local laws and mandates.