iJoy COMBO 25mm RDA - Screwless Two-Post

The iJoy COMBO RDA deploys a user-friendly two-post design with screwless mechanism similar to the system introduced on the brand-new COMBO RDTA II along with bottom airflow and the introduction of a full-ULTEM exterior structure. Measuring 25mm in diameter, the COMBO RDA presents a 3-piece structure with 24K gold-plated base, ULTEM drip tip, and high-quality Stainless Steel or ULTEM wall sleeve. When the posts are manually pressed down, the spring-loaded mechanism of the two-post structure exposes the terminal openings in which coil leads are inserted. Once the coils are set, release the pressure and the post automatically secures the coil in a consistent and effective manner. The result provides superior conductivity and a unique mounting experience. Airflow is cleverly implemented onto the base section with dual etched cutouts where air channels enters the structure and adjusted via knurled top cap. The COMBO RDA includes a packaging content of 10mm 810 ULTEM widebore drip tip along with a pair of prebuilt Clapton coils and post compression tool for building assistance.

iJoy COMBO 25mm RDA Features:

• 25mm Diameter
• 9mm Deep Juice Well
• Superior Stainless Steel Construction
• Screwless Two-Post Build Deck Design
• Each Post is Dual Layered - Silver-Plated & Gold-Plated Posts
• Spring-Loaded Mechanism - Pressed Down to Expose Terminal Openings
• 3mm by 2.5mm Terminal Openings
• PEEK Insulators
• Dual Slotted Side Airflow Control 
• Dual Bottom Vortex Airflow - Angled at 45 Degrees
• 10mm 810 Widebore Drip Tip - Acrylic or Delrin
• Gold-Plated 510 Connection

Includes:

• 1 COMBO RDA
• 2 Prebuilt Coils
• 1 Post Compression Tool
• Spare Parts & O-Rings

This product is for advanced users only. It consists of risk of damaging your mods, devices, and batteries if it is being used improperly. Please make sure that you have great understanding and have done researches on this product before purchasing.

Note: When it comes to using RDA, RTA, and RDTA, we strongly recommended to wash and clean all the atomizers thoroughly and carefully. Likewise, please have a great sense of knowledge when it comes to handling and using these products.

We always strongly recommend testing the coils with ohm-meter before using them with your mods, devices and batteries. Coils with low resistance are not suitable with all mods, devices and batteries. Please make sure that your mods, devices and batteries can handle low resistance before using them.

Note: There is always an inherent risk when using any rechargeable batteries at anytime and under any circumstances. ElementVape.com and any of ElementVape.com’s parent and subsidiary companies are not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making.

ElementVape.com and any or all of ElementVape.com’s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly.

When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries at the clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in controlled environment.