The iJoy CAPO Squonker 100W Starter Kit caters to a rebuildable builder's dream, deploying a versatile bottom-feeding COMBO RDA with the 21700/20700 platform of the CAPO Squonk 100W Box Mod. The CAPO Squonker Box Mod is constructed to fully accommodate the new iJoy 21700 3750 40A Battery (not included), with the option of using 20700 battery (not included) to provide a versatile, long-lasting device with phenomenal performance capability. The battery is top-loaded through a threaded battery cap, with the squonk-ready section located adjacent for ergonomic control while simultaneously catering to building enthusiast. The internal chipset features a maximum output rating of 100W with effective fine-tuning adjustments.
The iJoy COMBO Triangle RDA delivers a user-friendly two-post, dual terminal design with triangular orientation along with bottom airflow and the introduction of a full-ULTEM exterior structure. Measuring 25mm in diameter, the COMBO RDA presents a 3-piece structure with 24K gold-plated base, ULTEM drip tip, and high-quality Stainless Steel or ULTEM wall sleeve. Airflow is cleverly implemented onto the base section with dual etched cutouts where air channels enters the structure and adjusted via knurled top cap.
iJoy CAPO Squonk 100W Box Mod Features:
- Single 21700 High-Amp Battery - Not Included
- Single 20700 High-Amp Battery - Not Included
- Single 18650 High-Amp Battery - Requires Battery Adapter
- Maximum Wattage Ouput: 100W
- Minimum Atomizer Resistance: 0.05ohm
- Intuitive OLED Display
- Oversized Rectangular Firing Mechanism
- Adjustment Buttons Below Screen
- Top-Loaded Threaded Battery Cap
- Squonk-Ready Bottom-Feeding Section
- Short Circuit Protection
- Overcurrent Protection
- Overvoltage Protection
- Overcharge Protection
- MicroUSB Port - Firmware Upgrades
- Spring-Loaded Stainless Steel 510 Connection
iJoy COMBO Triangle RDA Features:
- 25mm Diameter
- 9mm Deep Juice Well
- Superior Stainless Steel Construction
- Gold-Plated Two-Post, Dual Terminal Design - Triangular Design
- 3mm by 3mm Terminal Openings
- PEEK Insulators
- Dual Slotted Side Airflow Control - 10mm by 2.5 per Airslot
- Dual Bottom Vortex Airflow - Angled at 45 Degrees
- 9mm 810 ULTEM Widebore Drip Tip
- Gold-Plated 510 Connection
- 1 CAPO Squonker 100W Mod
- 1 Combo Triangle RDA
- 1 Squonk Bottle
- 2 Prebuilt Coils
- 1 18650 Battery Adapter
- 1 MicroUSB Cable
- Spare Parts
- Instructional Manual
Please have a great understanding and technical knowledge on how to use this product in order to properly use it.
In order to use temperature control feature, it requires use of nickel, titanium, or stainless steel coils.
Note: There is always an inherent risk when using any rechargeable batteries at anytime and under any circumstances. ElementVape.com and any of ElementVape.com’s parent and subsidiary companies are not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making.
ElementVape.com and any or all of ElementVape.com’s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly.
When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries at the clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in controlled environment
Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Please dispose battery cells, chargers or any other electronic devices in accordance of local laws and mandates.