The iJoy CAPO Squonk 100W TC Box Mod is the builder's edition of the original CAPO 100W, integrating a bottom-feeding functionality with a refillable squonk bottle section powered by a 21700/20700 battery platform. The CAPO Squonk Box Mod is constructed to fully accommodate the new iJoy 21700 3750 40A Battery (not included), with the option of using 20700 battery (not included) to provide a versatile, long-lasting device with phenomenal performance capability. The battery is top-loaded through a threaded battery cap, with the squonk-ready section located adjacent for ergonomic control while simultaneously catering to building enthusiast. The internal chipset features a maximum output rating of 100W with effective fine-tuning adjustments.
iJoy CAPO Squonker 100W Box Mod Features:
- Single 21700 High-Amp Battery - Battery Not Included
- Single 20700 High-Amp Battery - Battery Not Included
- Single 18650 High-Amp Battery - Requires Adapter
- Maximum Wattage Ouput: 100W
- Minimum Atomizer Resistance: 0.05ohm
- Intuitive OLED Display
- Oversized Rectangular Firing Mechanism
- Adjustment Buttons Below Screen
- Top-Loaded Threaded Battery Cap
- Squonk-Ready Bottom-Feeding Section
- Short Circuit Protection
- Overcurrent Protection
- Overvoltage Protection
- Overcharge Protection
- MicroUSB Port - Firmware Upgrades
- Spring-Loaded Stainless Steel 510 Connection
- 1 CAPO Squonk 100W Box Mod
- 1 MicroUSB Cable
- Instructional Manual
In order to use temperature control feature, it requires use of nickel, titanium, or stainless steel coils and must be built with non-resistant wire.
Note: There is always an inherent risk when using any rechargeable batteries at anytime and under any circumstances. ElementVape.com and any of ElementVape.com’s parent and subsidiary companies are not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making.
ElementVape.com and any or all of ElementVape.com’s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly.
When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries at the clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in controlled environment
Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Please dispose battery cells, chargers or any other electronic devices in accordance of local laws and mandates.