The Ignition RDA by Congrevape is precisely tuned and engineered by the critically acclaimed design house that brought you the DOGE series, integrating Congrevape's first two-post build deck, Ceramic CV-TIPSYS drip tip, precision parallelogram airflow control, and superior machining of parts and details throughout the structure. Expanding upon the rich heritage of the DOGE line-up, the Ignition RDA deploys a spacious 18mm two-post build deck that is build friendly and efficient by design. Positioning and inserting coil leads is done within the 2.5mm diameter terminal posts, top-secured via Phillips screws with a flat surface area to increase contact with each lead. Each screws and the positive post are manufactured out of C110 Food-Grade Copper, within the Corrosion-Proof SAE 304 Steel structure, to ensure consistent and strong conductivity throughout the platform. Airflow enters the Ignition RDA's chamber directly on the side of the 22mm diameter chassis, adopting four laser cut parallelograms that optimizes direct-to-coil delivery, focusing on rapid and smooth airflow channels with airflow adjustment that can be throttled all the way down to a closed, flavor-focused option. The Ignition RDA implements Congrevape's 11mm widebore with VC-TIPSYS connection, constructed out of ceramic with a beautiful black polish finish, greatly reduces heat transfers and practically thrives in high heat situations. Beautifully designed with modern refinements in rebuildable technology, the Ignition RDA by Congrevape epitomizes the performance platform of every builder's dream.
Ignition RDA by Congrevape Features:
- 22mm Diameter
- 5mm Deep Juice Well
- Corrosion-Proof SAE 304 Stainless Steel Construction
- 11mm Black Ceramic Competition Bore - CV-TIPSYS Connection
- 18mm Spacious Build Chamber
- Two-Post, Single Terminal Design
- Top-Secured via Flathead Phillips Screw
- Deckmilled Negative
- C110 Food-Grade Copper Positive Post
- PEEK Insulator
- Four Laser Cut Parallelograms - Spark AFC System
- Gold-Plated Brass 510 Connection
- 1 Ignition RDA
- 1 Extra PEEK Insulator
- 1 Extra 510 Pin
- 1 Extra Positive Pin
- Spare Parts and O-Rings
This product is for advanced users only. It consists of risk of damaging your mods, devices, and batteries if it is being used improperly. Please make sure that you have great understanding and have done researches on this product before purchasing.
Note: When it comes to using RDA, RDTA, and RDTA, we strongly recommended to wash and clean all the atomizers thoroughly and carefully. Likewise, please have a great sense of knowledge when it comes to handling and using these products.
We always strongly recommend testing the coils with ohm-meter before using them with your mods, devices and batteries. Coils with low resistance are not suitable with all mods, devices and batteries. Please make sure that your mods, devices and batteries can handle low resistance before using them.
Note: There is always an inherent risk when using any rechargeable batteries at anytime and under any circumstances. ElementVape.com and any of ElementVape.com’s parent and subsidiary companies are not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making.
ElementVape.com and any or all of ElementVape.com’s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly.
When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries at the clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in controlled environment.