The HellVape REBIRTH 24mm RDA is the result of collaboration with Mike Vapes, implementing an unique two-post build deck, honeycomb style airflow, and a locking top cap to maintain the airflow settings. The build deck features two posts with large terminals measuring 3.5mm by 2.5mm to accept either bigger single coil builds or a dual coil configuration. In addition, the build deck has raised airflows to prevent any leaking and equipping the Rebirth with 6mm deep juice wells for plenty of juice-laden cotton to reside. Furthermore, on the top cap sleeve, 16 honeycomb style airflow inlets allow air to rush in via dedicated channels to hit the coil from underneath and from the side. The airflow is adjustable and can be locked to maintain the airflow settings should one need to drip more juice. The Rebirth RDA also features a squonking BF pin that can allow this vape dripper to be used in squonking applications.
HellVape & MikeVapes Rebirth 24mm RDA Features:
- 24mm Diameter
- 6mm Deep Juice Well
- Superior Stainless Steel Construction
- Dual Post Build Deck
- Side Secured via Flathead Screws
- Large Terminals - 3.5mm by 2.5mm
- PEEK Insulator
- Single or Dual Coil Configuration
- 16-Hole Honeycomb Style Adjustable Airflow Top Cap
- Locking Top Cap System
- 810 Widebore Resin Drip Tip
- Gold-Plated BF Squonk Pin
- Stainless Steel 510 Connection
- Available in Black, Matte Black, Gunmetal, Silver, Purple, Blue, Rainbow
- 1 REBIRTH RDA
- 1 Spare 810 Drip Tip
- 1 Stainless Steel 510 Adapter
- 1 Accessories Bag
- 1 Rebirth RDA Sticker
- 1 Positioning Tool
- 1 User Manual
Note: When it comes to using RDA, RTA, and RDTA, we strongly recommended to wash and clean all the atomizers thoroughly and carefully. Likewise, please have a great sense of knowledge when it comes to handling and using these products.
We always strongly recommend testing the coils with ohm-meter before using them with your mods, devices and batteries. Coils with low resistance are not suitable with all mods, devices and batteries. Please make sure that your mods, devices and batteries can handle low resistance before using them.
Note: There is always an inherent risk when using any rechargeable batteries at anytime and under any circumstances. ElementVape.com and any of ElementVape.com’s parent and subsidiary companies are not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making.
ElementVape.com and any or all of ElementVape.com’s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly.
When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries at the clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in controlled environment.