Hellvape DEAD RABBIT SE 4-in-1 RDA Kit

Shop the Hellvape DEAD RABBIT SE 4-in-1 RDA Kit, a rebuildable dripping atomizer kit, featuring a postless build deck, dual slotted airflow control, and 4 interchangeable caps. Set on the classic Dead Rabbit V2, the special edition kit features four interchangeable top caps of different colors for customization, allowing user to pick between black, red, blue, or clear. Maintaining the same superior 304 stainless steel construction for the postless build deck, the Dead Rabbit SE Kit's colored PTCG top caps reduces the weight of RDA combination significantly, while upkeeping the outstanding performance and utility that boosted the Dead Rabbit lineage to amazing heights.

Hellvape DEAD RABBIT SE 4-in-1 RDA Kit Features:
A Vapin' Heathen Project
24m Diameter
Deep Juice Well
Superior Stainless Steel Construction
Elevated Postless, Quad Terminal Design
2.5mm Terminal Openings
Side-Secured via Slotted or Hex Flathead Screws
Gold-Plated Positive Posts
PEEK Insulated Block
Single or Dual Coil Configurations
Dual Slotted Top-Side Airslots - Diagonal Orientation
810 17mm Wide Resin Drip Tip
810 16mm Wide Delrin Drip Tip
510 Drip Tip Adapter
Squonk-Ready Bottom-Feeding 510 Pin
Gold-Plated 510 Contact Pin
4 Interchangeable PCTG Caps
Available in Stainless Steel

Includes:
1 Dead Rabbit V2 RDA Deck
1 Dead Rabbit SE Clear Cap
1 Dead Rabbit SE Blue Cap
1 Dead Rabbit SE Black Cap
1 Dead Rabbit SE Red Cap
1 Gold BF Pin
1 Accessory Bag
1 User Manual

Note: When it comes to using RDA, RTA, and RDTA, we strongly recommended to wash and clean all the atomizers thoroughly and carefully. Likewise, please have a great sense of knowledge when it comes to handling and using these products.

We always strongly recommend testing the coils with ohm-meter before using them with your mods, devices and batteries. Coils with low resistance are not suitable with all mods, devices and batteries. Please make sure that your mods, devices and batteries can handle low resistance before using them.

Note: There is always an inherent risk when using any rechargeable batteries at anytime and under any circumstances. ElementVape.com and any of ElementVape.com’s parent and subsidiary companies are not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making.

ElementVape.com and any or all of ElementVape.com’s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly.

When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries at the clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in controlled environment.