The Hastur MTL RTA by Cthulhu MOD presents a Genesis-inspired structure with one of the most unique Mouth-to-Lung experience in the market, featuring a two-post, single coil design with 5 customized airflow restricted for a customized functionality. Creatively crafted by the designers behind the popular GAIA RDTA, the Hastur MTL RTA measures 24mm in diameter with 304 Stainless Steel with an elevated chamber design. The maximum juice capacity is 3.5 milliliters, accessed via an ergonomic threadless design to expose the two filling ports for today's popular E-Juice. The Hastur MTL RTA integrates a two-post build deck with four post terminal sections, tailoring for single coil configurations. A unique feature is the adoption of interchangeable airflow resisters located at the central internal airtube below the coil leads section. Each kit includes five swappable resisters - 1.0mm, 1.6mm, 2.0mm, 2.5mm, 3.5mm - for a wide range of airflow preference. The wicking system is based on the Genesis-inspired characteristics, with wicking cotton dripping down to the base for a vacuum effect, working in synergy with the entire tank to create optimal flavor recreation and anti-leaking design.
Cthulhu MOD Hastur MTL RTA Features:
- 24mm Diameter
- 4mL Juice Capacity
- Superior 304 Stainless Steel Construction
- Pyrex Glass Reinforcement - Optional Frost Glass
- Geni-Inspired Apparatus - Elevated Chamber
- Unique Two-Post Design - Single Coil Configuration
- 2mm Diameter Open Terminal Posts
- Top-Secured via Slotted Screws
- Deckmilled Negative Post
- PEEK Insulated Positive Post
- Dual Slotted Bottom Airflow Control
- Five Swappable Airflow Resisters - 1.0mm, 1.6mm, 2.0mm, 2.5mm, 3.5mm
- 510 Widebore Drip Tips
- 510 Contact Pin
- 1 Hastur MTL RTA
- 5 Swappable Airflow Resisters
- 2 510 Widebore Drip Tips
- 1 Slotted Screwdriver
- Spare Parts & O-Rings
- Instructional Manual
Note: When it comes to using RDA, RTA, and RDTA, we strongly recommended to wash and clean all the atomizers thoroughly and carefully. Likewise, please have a great sense of knowledge when it comes to handling and using these products.
We always strongly recommend testing the coils with ohm-meter before using them with your mods, devices and batteries. Coils with low resistance are not suitable with all mods, devices and batteries. Please make sure that your mods, devices and batteries can handle low resistance before using them.
Note: There is always an inherent risk when using any rechargeable batteries at anytime and under any circumstances. ElementVape.com and any of ElementVape.com’s parent and subsidiary companies are not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making.
ElementVape.com and any or all of ElementVape.com’s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly.
When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries at the clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in controlled environment.