The Geek Vape Griffin 25 Mini RTA expands upon the Griffin 25's highly effective rebuildable platform and elite build deck, introducing an unprecedented two-post dual terminal structure, enlarging the build deck to a staggering 18mm, and a compact 3mL juice reservoir. Through continual research and development alongside Geek Vape's innovative line-up, the Griffin 25 Mini presents a compact and refined 25mm diameter platform and expand on general usability and functionality. The Griffin 25 Mini improves upon the trendsetting two-post design, integrating a unique spin-off of the Velocity-Style deck featuring two positive terminals on top and two negative terminal on the bottom. This type of structural arrangement enables a larger degree of build configurations and accommodate a huge variety of coil types. A ceramic single coil adapters are included in each set, effectively sealing one half of the system for single coil centric builds. Airflow retains the extraordinary characteristic of the original, with airflow entering the exterior dual airslots and feeding into dual internal airflow tubes, each measuring at 5.3mm by 4.5mm diameter. An optional top airflow system with quad adjustable airslots provides ample air channels directly into the build chamber, adding another layer of airflow and increasing effectiveness. The convenient top-fill is enabled by a simple threaded mechanism, exposing the dedicated fill area for the 3mL juice reservoir. Additionally, two types of drip tips are available for the Griffin 25 Mini RTA, such as a 10mm Delrin straight bore or the 9.5mm Delrin sloped bore. Built upon the cutting edge design mantra of Geek Vape, the Griffin 25 Mini RTA is the new benchmark for a complete rebuildable tank system.
Check out the Griffin 25 Plus RTA here.
Griffin 25 Mini RTA by Geek Vape Features:
- 25mm Diameter
- 3mL Juice Reservoir
- Superior Stainless Steel Construction
- High-Temp Resistant Silica Glass Reinforcement
- Enlarged 18mm Build Deck
- Unique Velocity-Style Two-Post Design
- Deckmilled Bottom Negative Posts
- Top Positive Posts
- PEEK Insulators
- Single or Dual Configurations
- Ceramic Single Coil Adapter
- Adjustable Dual Exterior Airflow
- Dual Internal Air Tubes Inside Chamber
- Bottom Airflow Control for Direct Air Channels
- Top Airflow Control
- Convenient Threaded Top-Fill Method
- 10mm Delrin Straight Bore
- Adjustable Gold-Plated 510 Contact Pin
- Available in Stainless Steel and Black
- 1 Griffin 25 Mini Tank - Top Airflow
- 1 Standard Top Cap
- 1 Ceramic Block
- 1 Allen Key
- 1 Replacement Glass Tube
- Spare Parts
This product is for advanced users only. It consists of risk of damaging your mods, devices, and batteries if it is being used improperly. Please make sure that you have great understanding and have done researches on this product before purchasing.
Note: When it comes to using RDA, RDTA, and RDTA, we strongly recommended to wash and clean all the atomizers thoroughly and carefully. Likewise, please have a great sense of knowledge when it comes to handling and using these products.
We always strongly recommend testing the coils with ohm-meter before using them with your mods, devices and batteries. Coils with low resistance are not suitable with all mods, devices and batteries. Please make sure that your mods, devices and batteries can handle low resistance before using them.
Note: There is always an inherent risk when using any rechargeable batteries at anytime and under any circumstances. ElementVape.com and any of ElementVape.com’s parent and subsidiary companies are not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making.
ElementVape.com and any or all of ElementVape.com’s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly.
When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries at the clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in controlled environment.